Questions & Answers for: changing rear brakes 2001 gmc

...it's a lot of labor to pull everything apart to get at the seals, plus new rear brakes. My Ford ( and I'm sure your GMC) require removal of the rear axles to change the seals. Good Luck! ...

...rear brakes providing the shoes are good... just drive vehicle in reverse and pump brakes... rear shoes are self adjusting so they should "adjust" themselves... after doing this test by putting on ...

...REAR SEAL. MY 98 SAVANA 3500 HAS HAD 3 REAR SEALS REPLACED AND BRAKES BECAUSE THEY GET CONTAMINATED AND STICK WHEN COLD. I WAS TOLD THAT GMC'S OF THIS TIME PERIOD ARE FAMOUS FOR THE

on my dodge since i got it in 2001 and i put 8 sets of pads on the front and just changed the rear lining and thats only because the rear wheel cylinder was leaking causing the rear brakes to lock up.

...gmc 3500 box truck. no brake lights. changed 1997 gmc 3500 box truck. no brake lights. changed the brake light switch. have running lights,turn signals, hazards. no alarms of any kind. all light ...

...changing the brakes on a 2004 3500 series gmc savanna 9600lb do i need any specila tools? Not really, some basic tools, metric sockets and wrenches, screw drivers and a 6" C clamp to compress the ...

back brakes how do i set them up its for a gmc 2001 w 3500 Are the back brakes self adjusting? If so, if the brakes don't 'grab', does that mean they are completely worn out?

...brakes on a 2001 gmc savana 3500 Any brake work on your vehicle, is not any differentor more difficult than most other vehiclesThere is more to brake service or work, than just changingout brake ...

...frame rail, ? and condition of the rear taillight assymblies, ? corrosion could be in these areas. check all ground wires also, not sure about relay ! don' t think so ! why would brakes need one

...GMC 3500 I want to install a trailer brake switch on my 2000 GMC 3500 truck. its located at the top of the brake pedal arm Just go to that adress http://www.etrailer.com/faq-brakecontroller.aspx you ...