Questions & Answers for: change spark plug dis engine

...spark plug current. best to dis-mount the spark unit (follow plug wires back to source) and dry and clean it thoroughly. We had the same problem on ours. Ours was running a cylinder misfire. We ...

...spark plug diagram, and firing orderto finish project! thanx 1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6 4.0L ...

...be the O2 sensor. I know it's not the fuel filter, spark plugs, spark plug wires, Vehicle Speed Sensor, Dis. cap, or TCM. Try changing your ignition coil. Mine was bad and causing the same

kocking and missfiring when in low rpm or in overdrive changed coil/wires/spark plugs.dis cap.mass air flow.tps.good gas press. check the engine timing

...there to check. Also changed puugs and wires Check to see if there are valve/header issues. 89 ford ranger no spark to new coil main side. both new coils and battery what next dis was checked and is ...

...spark then i would change pickup coil & Dis. mogul./ i didn't see a engine size.but unless it is a 4 cylinder /this info is for V/6 or V/8cyl.if you should have any further questions feel free to ...

...spark plug) & my other questions is on the distributors how are they hooked up to the spark plugs in case i need to replace my spark plug wires I need to know which wire on which distributor goes ...

...spark plug if you have insufficient or more clearance you wont get spark check this. 2.check the wire coming to the spark plug.if power is not coming to spark plug there wil be discontinuity in the ...

...spark plugs, plug wires, And distributor cap. Make sure that the plugs are gaped correctly to specification you can find that information on the repair Manuel of the auto manufacturer Need year of ...

...spark plugs put a new plug check engine light still on could it be cool pack r plug wire r a mass air flow senser I would have the DIS module checked, most all national parts store chains can check ...