Questions & Answers for: change default tray hp laserjet

...tray is probably bad and the cost to repair exceeds the value of the printer. Steve I have change the fuser unit in lj 2430tn printer after unwanted noise are coming. No papers are jam. But print is ...

...tray is not well set (A4, letter, depends on what format you have set as default in the driver). Check the settings of the driver and the printer: Menu (green button) Information (button down) ok ...

change paper size...just won't stop asking. If I put the add-on paper tray 500 sheet that tray works fine. I was thinking though I might order another paper tray and try it since I replaced the pickup

...hp laserjet printer 2420 paper tray setting Remove the packing material from the printer. Remove the all orange tape from the outside of the printer. Remove orange tape from paper tray 2. Remove the ...

won't recognize tray 3 If you recently had to printer off of tray 3 there is a possiblity that the connector broke when putting the printer back on. You say not recognized, is that through the ...

Hp LaserJet 2430tn and its telling me there's a jam in the back but when I open it i can't see a jam. does anyone know what could be wrong? I have a Hp LaserJet 2430tn and its telling me there

change default paper tray HP LaserJet 9050 Paper wants to pull from tray 1 not tray 2 - how do I change it so that it will pull from tray 2 When you click Print then right click on your HP ptinter - ...

...paper. Also it shows a jam in the legal paper tray but there is no jam. change Tray1 and Tray2 Paper size is any size and Paper type is any type as well as check override is on if its off change is ...

change the default on my HP P30005dn to Tray 2? I get notice that my printer has no paper - Manual tray is Tray 1, loaded tray is tray 2 Normal default on HP is tray 2, however if you do not have that

...tray what is the default paper size for it is. https://hp-laserjet-1320-printer-series.printerdoc.net/en/managing-the-printer/using-the-hp-toolbox/advanced-printer-settings-window/ ...