Questions & Answers for: change clutch fluid 1990 nissan

fluid. I recently had a new cluth installed and the slave cylinder was replaced too. The slave cylinder came from AutoZone...a generic replacement, but it worked fine for a couple of weeks. What would

...fluid level-u may need the throttle cable ajusted that hooks to trans-band n clutch could be out of measure too--trans hydra-valve system could be worn--see all these things effect the way the fluid ...

1990 300zx N/T Clutch not engaging properly I have a 1990 300zx Non turbo and recently its been giving me a huge problem. the clutch pedal is very easy to push down(to easy) and I've noticed that it ...

...change flywheel on 1990 300zx non turbo 2+2? pull the transmission. remove the torque converter (automatics) or clutch and pressure plate (standards), the bolts for the flywheel are under that. make ...

...change 1 injector in my 1990 300zx.I am I recently change 1 injector in my 1990 nissan 300zx.I am getting blue smoke from my exhaust. Can you tell me what is going on. Thanks You should always check ...

fluid is it left over or are the hoses wrong? its a 1990 infinity M30 but same engine as 300zx 3000 v6 rear wheel. please help cant find expert mechks. you might have a broken trans fluid cooler tank.

what are the torque specs for the flywheel and clutch for a 1990 nissan 300zx non turbo? Flywheel 61-69 ft/lbs Clutch cover to Flywheel 25-33 ft/lbs

...fluid in the resevoir Clutch master cylinder? Try opening the bleeder on the slave and letting the gavity feed it to the slave.... when you have clean fluid flowing out of the slave... close the ...

...1990 300zx 2+2 non turbo just recently i drove the car to the store no problems when we cam out the car would crank and crank but would not start so i sprayed starter fluid in the intake and it ...

...shifting? My 1990 300zx is an auto, nonturbo is not shifting out of first gear. Ive read online that it may have something to do with the tcm. help? you might have to change your strainer and ...