Questions & Answers for: carousel not turn

carousel will not turn We had just cleaned the unit and put the carousel back on, now it will not turn into proper position. This happened before under warranty and we had to send it in for repair ...

...you will see it pull gently on the carousel to locate it release the pawl and, the tray will slide right out (be sure to turn the carousel to the #1 position closest to the front before

sharp carousel r-508ak - does not heat up the food my model is the sharp carousel r-508ak -- it has stopped heating food. the light comes on, the carousel turns but not heat ? You probably have a ...

turn. Because they were twisted, the carousel could not inflate fully. The carousel motor is powered by a wire that comes from the fan motor. I disconnected it and attached a 2-prong plug. (Be careful

...Turn the carousel over and gently rotate the metal plate covering the bottom of the carousel into position. You will hear/feel a "click" when it's in place. The projector may have jammed because ...

...Carousel rotation error Remedy Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. Replace the carousel drive ...

...carousel? No problem! FIRST, make sure the locking ring is in place and tight on the top of the tray. Next, locate the center hub (the hole in the center of the tray fits over it). In the center of ...

...turn carousel by hand. Will not play, will not show different discs even when turning the carousel by hand Could be a broken/loose carousel belt. take the cover off and look near the back of the unit ...

CAROUSEL does not turn wire is broke on motor that turns carousel .i can not figure out how to take apart motor. please help Replace the motor. You need the pan drive

rotate the motor in one direction to turn the carousel and in the other direction to clamp the CD in the spindle mechanism. If the spindle clamp is hung up, this will prevent the carousel from turning