Questions & Answers for: brother mfc 8220 printing problems

...Brother MFC-240C and, after trying to send in the product registration using the fax feature, got the 'Scan Unable A6" error message. The troubleshooting section of the manual says the cause might be ...

I cannot recieve faxes I can send, print and copy however when I am sent a fax the machine goes into sleep mode. I set it to recieve Fax only turned of sleep and now I get a Com error? There seems to ...

...Brother MFC-8220 have problems of scan and fax the paper. It always show the 3" black line on the right side of the paper, It doesn't have any problems of receiving fax and print. I tried everyway ...

...brother mfc-8220 printer. Thinking it was maybe dust or something I used one of the air cans you buy to clean computer parts and sprayed it into the print. The printer was dirty, dust and all, but ...

...Brother-MFC-8220-USB/3000-2118_4-65318.html ". About the lines which appear on the print, you will have to buy a Drum unit for your Brother 575, because the drum cleaning blade has quit working and ...

MFC 8220 - check if it copies with good colour - if it does then the printer driver may have been damaged in some way- go to the brother site- remove driver per the instructions and then reload driver

I have new information regarding a problem I am having with my 8820. I now notice that while printing multiple pages I eventually begin seeing smears of toner on the page. However, if I reprint the ...

...Brother MFC 8220 with a nonBrother cartridge and the original Brother drum. No problems printing until today. I tried to send a 4x6 piece of thin card stock through the front manual feed on the ...

mfc-8220 prints black bar on right side When faxes are received or copies made, a 2 inch black bar is on the right side of the paper the entire length (vertical) of the page. However, nothing is ...

It does not produce a dialing tone and it doesn't fax nor recieve The all in one can only copy and scan but can not fax. Here are some things to check: 1. Is the unit attached to a direct line (not ...