...bonnet release cable has snapped on my 2001 audi a4. Can't get bonnet opened at all, have taken front grill out but can't find any way to get at the lock Most of the time the cable snaps at the ...
...bonnet release mechanism broken How can I release the bonnet of my 2005 audi a4, now that the release mechanism from inside thew car has broken? This can be over come by getting a pair of vise grips ...
Release handle in drivers footwell. No resistence is felt. suspected broken cable. Require a method of releasing bonnet catch or gaining access to cable locations . REMOVED PANEL FROM UNDER THE BUMPER
...bonnet release from inside thecar. You then have to get a piece of fairly strong wire(I used a 2.8mm welding rod) and bend a fairly tight hook in one end. Using a torch so you can see the bonnet ...
...WON'T RELEASE BONNET, HOW DO i GET INTO BONNET release the cable from the lever and using a pair of plies pull on the cable to release the hood replace the cable when you get it opened. hope this ...
Question about 2000 S-Type
bonnet release? If so loosen cable/wire by bonnet catch make sure it's free of any cable ties and clips, and is loose. Also inside vehicle try to remove any type of covering behind bonnet lever/handle
Question about 2000 S-Type
...rover 75 bonnet! when release handle has broken? release hadle has broken away from the cable that releas`s the bonnet Use pliers and fit new handle and cable. Make sure it works BEFORE closing ...
Question about 2000 S-Type
...when the cable is released how to open the bonnet on a Bentley GT Continental 2005 if the cables of the bonnet are released sometimes you can thump the bonnet and they release , means it needs ...
Question about 2000 S-Type
...bonnet release cable through to the engine bay, and shut the bonnet completely. Just wondering if anyone knows how to open it? Someone with extraordinary skill and patience (and a bright work light) ...
Question about 2000 S-Type
...a small access hole between the bonnet and grille. A thin wire hook and a lot of poking around can release the bonnet. if this doesn't work you might have to destroy the front grille to get
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions