Questions & Answers for: boiler stay lit

...seems locked in at a certain temperatutr any idea how we can change this boiler wont stay lit up no hot water or heatingthaks mal. depends what ur fault is but without stating it no one can ...

...THE BOILER FIRES, BUT WHEN IT IS PUT BACK, IT WILL NOT STAY LIT? Don't jumper that control out. You likely have some thing going on with the make up water. best i can do with information provided. ...

...boiler Mini-Therm II, the pilot keeps going out. the unit is about 5 years old and is used for radiant floor heat. How long does it stay lit (if at all)? It sounds like the thermocoupler (about 10 ...

...Push knob down & hold. While holding, light pilot & keep knob held down for one minute. Let go of knob & see if pilot stays lit. then turn knob to on position. Boiler should then turn

...boiler won't stay lit it's pilot light on the gas boiler won't stay lit it's not the thermocouple any help is appreciated The pilot flame must touch (burn) the tip oqef the t-couple to hold ...

...stay lit we have cleaned all we can, we have a solid lit light and now we have jumped the high limit switch. everything will come on and stay on but flame wont stay lit There might be a sensor in ...

...stay lit the outside of the boiler is very hot to the touch. The blower is blowing. Is it possible that its no turning as fast as it should? The error I get is either Air Flow or AGS. Thanks for your ...

...stay lit Try cleaning the thermocoulpe. If its dirty and sooty no enough heat gets to it and the pilot won't stay on. Also make sure its aime inside the hottest part of the flame. The small blue tip ...

...stay on. The flame will have heated the sensor in the combustion chamber and the boiler thinks that there is a flame and will allow the main gas jets to light when demanded . If the flame does not ...

...wont stay lit You have one of three things here 1. Dirty pilot, needs to be cleaned. 2. Bad thermocouple needs to be changed and pilot assembly cleaned. 3. Bad gas valve pilot solenoid call a ...