Questions & Answers for: bearing noise front hub locked

bearing noise coming from my left front wheel one day,after that when I needed 4x4, I locked in the hubs but I only have rear wheel drive.Before this weird noise from the left front I could always get

Ad

...noise only when you are in 4WD there could be a number of reasons. You could have a broken axle shaft or a bad bearing in your ring and pinion. Your front driveshaft could be bent or at least not ...

Ad

...noise from the drivers side brake caliper area when i turn or hit a bump or hole. what couls the problem be. Bearings, struts, what??? Front hub bearing. If you were the one who replaced the pads you ...

noise should come from the front when you are driving on asphalt as you are in 2WD, right? If you have been using 4WD with the hubs locked on asphalt, then there's every chance that your CVs are shot.

Question about 2000 F350 Super Duty Super Cab

1 Answer

bearing going out in the hub. The reason it stops making noise with 4 wheel engaged is having the truck in 4 wheel drives puts power to the front hub. Which gives it more stability. In other words you

Question about 1997 Tahoe

1 Answer

Front hub locked in i hear a clicking adn whining noise going down the road and with the wheel off it clicks when i turn the rotor like hub is locked in wheel bearings!!!

Question about 1997 Tahoe

1 Answer

...bearing is indicated by a persistent whining growl. On front wheels the noise often gets worse during a turn as the weight of the vehicle is transferred. While the wheel is off check the condition of ...

Question about 1997 Tahoe

1 Answer

...for 5 years and new encounter this noise. Any idea's? I am thinking that I need to replace the bearing and replace the seal on the shaft that goes through the hub. A howl usually is a bad ...

...bearing put stethoscope on whilst running in 4wd outer wheel not responding like it should got it to turn noise appeard to be in outer hub replaced outer hub assembly with new assembly drove 1km felt ...

...bump. Either way, light application of brakes would stabilize brake pad, caliper, or bearing. Odd thing is that noise goes away. Even cv joint could make noise but all mentioned would vary by

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...