Questions & Answers for: auto paint Food Mixers

what kind of paint should I use on my Hobart 20 quart mixer? Alot of people use house paint,but if you get a good primer and then an automobile spray paint such as 3m it works well.

...with a low xylene primer (such as auto primer) and repaint the spot with a low xylene spray paint such as Zynolite's Rust Mate One Part Pre-Catalyzed Epoxy (also comes in brush on). Hope it helps, ...

how can i tell what year my 80 qt. hobart was made and what paint should i use? robert Try this contact form: http://www.hobartcorp.com/Contact-Us/ Thay will need the serial number.

How do I access gears in a200 hobart. I don't see any screws to detach top. top looks painted shut. There are two screws holding an access cover on the top front half of the mixer. These screws are ...

I want to take the stand and base off from the motor so I can have it sandblasted and painted. Is there a special offset tool or do I have to modify a screwdriver to seperate the two parts from my ...

Help, the groove pin won't come out of the planetary! I already chipped so much paint of the mixer! Hello, I was given the KitchenAid K5SS Heavy Duty and I wanted to grease it. Frustratingly, after ...

What should I be looking for when the gears opereate at the same speed? Having problems with shifting gears. All gears seem to be same speed, fast. Second gear doesn't want to engage. Gears appear to ...

why is adjustment scew not working on kitechenaid turning it clockwise and counter clockwise does nothing. paint scraping off beater Keep turning it counter clockwise, that's the way to raise the head

is there a place that recoats mixer with proper food safe coating the paint is chipping off of my commercial mixer and I need to have it repainted is there someplace that does that

the mixer head on my D-300 has absolutly no power & turns very slow with a chattering like motion while on speed setting #3. I can also stop the mixer head from turning by hand. Motor or brushes to ...