Questions & Answers for: adjust fuel mixture 1991 ford

1991 ford explorer checked fuses and relays all good no power to distributer or fuel pump no spark turns over smooth. its a 4.0 v6 possibly the ign. switch in the run start poll check for power with ...

...1991 Plymouth Voyager - Do we need to drop the engine? NO. Disconnect battery ground cable. On 3.0L/V6-181 models, loosen air pump tube at exhaust manifold, then swivel tube away from starter. On all ...

...from a 1992 Ford Explorer interchange ito a 1991 Explorer? it should be a direct bolt it proccess. u will prob want to get the ecu from the donor car to help rule out any problems u may have

1991 ford explorer firing order... Need to know 1991 ford explorer firing order For the 1991 Ford Explorer 4.0L SOHC V6: Firing Order: 1-4-2-5-3-6 Cylinders: ...(back) 3...........6 2...........5 1...

How do you adjust the fuel mixture that's burning too lean? you can't adjust fuel mixture , you have a vacum leak

...1991 ford explorer problem. motor turns over. when air fitler line removed spray ether starts and then dies. whats wrong It's not getting fuel, when you turn the key, listen for a whine coming from ...

...ford explorer v6 with a pushrod motor and after we replaced the pushrods, the head gaskets, the valve cover gaskets and the fuses, the car will not idle. what could be the problem? Have you adjusted ...

1991 Ford Truck Explorer 2WD V6-245 4.0L firing order firing order? http://www.2carpros.com/questions/ford-explorer-1991-ford-explorer-firing-order-for-spark-plugs There you go. firing order is 1, 4, ...

...so that the ECM can adjust the air/fuel mixture) and 2 oxygen sensors(O2) ( one in each exhaust pipe after the cat converter to read the cats performance and to final tune the air/fuel ...

1991 Ford explorer v6 0.060, 0.454, 0.040, so depends on the make and type of plug you are using spark plug gap for 1991 Ford explorer v6 Google Search all the plugs, all the gaps https://www.rockauto