Questions & Answers for: 5 4 triton misfire

...misfire on cylinder 4 on my ford f-150 4.6l triton v8. Where is cylinder 4 located? here is the cylinder layout diagram for thios engine. passenger side front to rear 1 2 3 4 drivers side front to ...

5.4 liter triton misfiring in cylinder 1 and 5. Changed the plugs or had all the plugs changed. Changed the coil packs and it did not help one bit. Any help would be great. check timing might be ...

misfire on 2000 Ford Exp 5.4l triton engine what is the missfire code, has the recall been done for the leaking heater core coolant hose? the leak drips onto the passenger side ignition coil and ...

...triton truck checked at advance and they said it was misfire on #6 what is this and how can it be fixed It is either a fouled spark plug or the coil for number six cylinder It's a misfire in #6 ...

v6 mk triton misfiring under acceleration i have a 98 mk triton 3.0 V6. under full acceleration it drops a cylinder and hesitates. it doesnt do it if i accelerate slowly. im thinking that its not ...

#2 cylinder misfiring or skipping. Need the location of #2 cylinder for a 2003 Ford F250 Super Duty Triton 5.4 liter motor Cylinder #2 will be the second cylinder from the front on the passenger side,

...triton misfire I Have a 2003 ford f150 5.4l 4x4 sounds like its misfire & lostpower what can it be? can it be the EGR valve? Have the fault codes read first and fix the coded faults before you ...

...misfire #8 Could be coil on spark plug or on top engine. most likely #8 coil is bad....could be a plug or wiring though...is it a 3 valve triton or regular 5.4? These Ford engines are known to have ...

...ignition cools go NAD often invtje triton v8 have multiple misfire on 4 and 5 changed the cool and the plugs still same thing Let in run with the hood up in the pitch black dark and look for blue ...

...Triton. Why is there a misfire on cylinder 4? I just put 8 new plugs and one new cop on and it still says tht I've got a misfire on number 4 do is there a way tht I can reset the pcm on my own Bad ...