...shift stickinh I have a 2001 300m chrysler (automatic), the gear shift was not smooth when i purchased the vehicle, used. it has gotten to the point where if feels like its going to break when im ...
...shift cable is coming apart inside. You will need to disconnect it at both ends and make sure it slides easily. if not, change it. If you are good with mechanical things and have a bit of patience ...
...300m could the shifter cable be seizing up? If you're on an incline, that will affect it. Try setting the park brake prior to shifting to park. Also there is a cable/interlok safety system that ...
...shift into the manual shift gears. What is the fix? check for a bent or damaged shifter linkage or cable, may be an internal problem in the tranny itself. shifter may be coming apart internally
...300m that will not shift out of first gear. i just had my shifter and cable replaced. It was a big difference but now it wont shift out of first to second. Please help check the transmission ...
300m shifts into 2nd gear and locks out all other gears. (limp mode) Changed speed odometer sensor, and have pulled #11 fuse, Checked wiring. battery cables removed for re~set. What else can be done .
...came off. we put it back on and its now shifts but extremly hard. That shift cable is bad and needs to be replaced. I have seen this on LH cars like the 300m, Intrepid, Concorde, and
Removing shift linkage 300m what linkage? the shift mechanism works with a cable; do you mean the shifter module in the cabin?
300m was hard to shift into gears and now the shifter is very loose and moves in any direction. It will not go into any gear. What does this mean? How do I fix it? The shift cable could be broken. You
Question about 1999 300M
...300M won't shift out of park. Pulled so ******* the shifter it broke. possible internal locking pawl stuck fault or adjustment required
ADJUSTMENTS
sourced from another forum
The ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions