Questions & Answers for: switches brake pedal chevy colorado

...do not work! I have checked the bulbs and the fuse and they are all good. What should i try next? it is the brake switch on the pedal. the contact inside the switch is bad There is a Recall # ...

brake pedal I have the same issue. The brake lights on the tail won't work. The rear cab brake light does work. I've checked the fuses and replace the brake light switch. They still don't work. It's a

...brake pedal. If you follow the metal shaft leading up from the pedal you will see a switch with a plunger. Push on the pedal with your hand while you can see the switch and see if the plunger moves ...

...brake pedal and you will see your brake switch up along your brake pedal arm. It will either be between the brake arm and the firewall so when you brake it pushes the switch in. Or it will be between ...

brake pedal is pushed. Sounds like your tail light board may be shorted,switch the board to the other side to see if the problem follows the board or stays on that side if so it could be a faulty turn

where is the brake light switch on the chevy colorado 2004 is ti round or is it square can you sent a diagram of the location of the part brake switch is at the brake pedal

...BRAKE PEDAL POSITION SWITCH WILL SET OFF CRUISE CONTROL WARNING LIGHT.IF BRAKE SWITCH OKAY.THE DEALERSHIP HAS TO DIAGNOSIS AND FIX PROBLEM. Actually that's for the Tire Pressure Monitoring system. ...

the brake light fuse keeps blowing on my 2004 chevy colorado as soon as i touch the brake pedal brake light switch may be bad

...the bulbs. The brake light switch , usually mounted to the pedal bracket, is probably bad . If equipped with cruise and driving down the road, see if hitting the brakes disengages the cruise speed

...brake pedal, the switch contacts close and battery positive voltage is supplied to the stop lamps and center high mounted stop lamp (CHMSL) which are grounded at G105. ...