...out and causes misfires. If this is the case, the only solution is to replace the gasket and the plugs. Please rate me on this answer. How do I replace the valve cover gaskets in a 2003 Kia
how do i change valve cover gasket on 2005 kia sorento? Did you find a solution? I need to do the same thing.
valve cover gasket on 2003 kia sorento 3.5 RWD Did you find any information? I need to do the same thing.
kia sorento ex LOCATED UNDER THE BLACK COVERS ON TOP OF THE VALVE COVERS YOU HAVE 3 PLUG WIRES AND 3 COIL PAKS YOU HAVE TO REMOVE THROTTLE BODY TO REPLACE THE ONES ON PASSENGER SIDE AND BE CAREFUL NOT
...If you are feferring to the valve cover gasket, Just remove the cover and replace the gasket. You may need to remove other hoses and disconnect wiring harnesses to accomplish the removal of the
Question about 2005 Sorento
how do you change the third brakelight led board on a 2005 kia sportage how do you remove the left valve cover on a 2004 kia sorento 6 cylender
Question about 2007 Sorento LX 4x4
2005 Sorento and had my local KIA dealer do this job and other work as long as the front cover is off, replace the water pump, the timing belt idlers and tensioner assembly. It's cheaper to d all that
...about th V6 engine it is a seriously involved job to undertake , i've included a link to a kia forum for more info and advice , keep me posted if you wish valve cover gasket replacement Kia ...
Question about 2005 Sorento
...2005 Sorento 3.5 changed out valve cover gaskets and tuned up since I've done this all it does is crank over tries to start but will not start I tore back down to make sure I did not have the plug ...
Question about 2005 Sorento
Kia Sorento generation JC 3.5 V6 4WD valve cover torque settings please? In the link and a video as well. NOTE: they are POUND INCH not Foot Pounds. Torque Pattern for Valve Cover? - Kia Forum ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions