...2004 mercury mountaineer is sputtering when accelerating up hills what is the problem Depending on which engine you have,this sounds like bad sparkplug wires, or a bad coilpack,if you have the 4.6 ...
Question about 2005 Explorer
2004 Mercury Mountaineer when my car went into failsafe mode I was shocked as you were I discovered that if I took off the positive battery cable from the battery post waited a few seconds took a wire
my 2003 mountaineer engine light is on. the code reads cylinder #8 the spark splugs have been changed, The mechanic says he has to take the top of the engine off to get to the problem. Is this true? ...
...2004 mercury mountaineer i have codes keep coming on p0302 p0316 ive changed crank sensor and coil on number 7 cylinder i bekieve the coil went bad because when i got it not to long ago it fixed the ...
...2004 MOUNTAINEER AWD 4.0 V6. STALL WHEN PUT IN GEAR. DTC P0320 & P2106 AND FAIL SAFE MODE KICKS ON AND OFF ON TSOWN. I DELTE CODES AND THEY RETURN INTERMTTENTLY BUT STILL NO CHANGE. HAS ALLNEW ...
...2004 Mercury Mountaineer Now you have to stop using it,sorry You have two main Fail Safes One is overheating Yours is IGNITION COIL MISFIRES Without getting in a long technical story the individual ...
No compression in cylinder number 3 Took it to a shop and had a machine hooked up it read that there was misfires in cylinder 1, 3 and 5. Then done a compression test on cylinders 1 and 3. There was ...
want to know what code P0308 and P0316 means went to parts store it read P0308 and P03316 P0316 Misfire at Startup P0308 Code Cylinder 8 Misfire These links will explain the codes. The problem could ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
