Questions & Answers for: 2003 hyundai santa fe 3

Santa fe studdering and won't accelerate right? RPM's jump and then steady with continuing studdering? I got in --drove great. Then parked for 15 minutes on a hill and now every time I go to ...

Ad

Question about 2003 Santa Fe

1 Answer

Hi,

...Hyundai Santa Fe 2003 SUV. It has about 110000 Km on its odometer. Recently, I have noticed that sometimes when I drive faster than 100 Km/h (60 Miles/h) on the HW its speed drops drastically for a ...

Ad

...2003 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in ...

Question about 2003 Santa Fe

2 Answers

...2003 Hyundai Santa Fe? I ordered one hoping this is the problem I'm having. It has 2 prongs facing out and 3 on the bottom which must be where some wires connect and 2 holes to secure it somewhere. I ...

...santa fe 2003 engine became loud and seems to have lost some power. turned off imediately found oil was low by 3 quarts no engine light or warning. engine still loud any suggestions i dont see oil ...

2003 Hyundai Santa Fe Hi, Steps for Removing the Power Steering Belt would be :- 1. Apply the parking brake. 2. Jack the right front and support with a jack stand. 3. Remove the under engine cover, if

...upper intake manifold off to Do i need to take the upper intake manifold off to change the back 3 spark plugs? IF YOU GOT A 2.7 ENGINE TAKE OFF ENGINE COVER.YOU WILL NEED SPARK PLUGS WIRE BOOT

...2003 Santa Fe with 3.5 6cyl engine that is ideling rought & lots of missing off a stop. had codes PO001,03,05. Had wires & plugs replaced 2 weeks ago & still running rough. Now ...

Question about 2003 Santa Fe

1 Answer

very poor gas mileage 10 miles per gallon 2003 santa fe #1. scan fuel trims (adaptives) #2 Vacuum Leaks #3 Timing #4 Engine parts WORN NOT much else to check -- diagnostics are HEAVY on your end.

...santa fe and followed programming instructions and eventually was able to program the new remote. But, I did not realize I had to program my existing remote at the same time. Since, I have retried ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...