Questions & Answers for: 2003 hyundai elantra brake problems

hyundai coupe/handbrake failure Every year my coupe fails an m.o.t due to a handbrake problem,is this a common fault, how do you fix it? the coupes and Elantras have issues with the rear calipers ...

Hyundai Elantra 2003 model There is a switch down on the floor by where the gas pedal is. Reset that switch, until the problem fixes itself. If it does not fix itself that way, you can follow the wire

2003 hyundai elantra gls abs/tcs light on 2003 hyundai elantra abs/tcs light on light went on after themostat overheated car overheat controlled brakes working Two seperate problems. I would say you ...

...elantra sounds like scraping metal when she drives its not the brakes i know what that sounds like i'm thinkin its the rotor how hard is it to repair? and how much am i looking at spending to replace ...

...2003 hyundai elantra. Both the ABS and TCS lights are on. I don`t know what to do. This is most likely a problem in your ABS control module. Have it checked, after you check the brake pads for wear. ...

...2003 HYUNDAI ELANTRA GLS SEDAN. WE HAD THE MASTER BRAKE CYLINDER REPLACED. EVER SINCE THEN I AM EXPERIENCING FRONT BRAKES OVERHEATING. WE REPLACED FRONT BRAKE CALIPERS AND BRAKE PADS. RECENTLY HAD CV ...

...2003 elantra, code p0501 it says its a speed sensor but my car is not abs breaks Hi, the speed sensor is needed even on vehicles without anti-lock brakes. Is your speedometer working? If it is, the ...

2003 hyundai elantra low idle check engine lights two broken fly wheels blew engine put rebuild in. new starter alternator battery subframe radiator control arms brakes and about three thousand later ...

2003 hyundai elantra i have a 2003 hyundai elantra car it has tcs,abs,and brake lights on what is the problem tcsd and abs work of sensors on all wheels so check for wiring and connections brake light

2003 Hyundai Elantra won't start, but has power. Trying to put car from park to neutral. I tried turning key to on position then stepping on brake, but shifter won't budge. Just need to move it a ...