Questions & Answers for: 2003 ford windstar missing

...2003 Ford Windstar Van into reverse and backing up it stalls out. There aren't any codes showing up or other problems. It just dies and does not miss or give a sign that it is going to die. Any ideas ...

Ad

Question about 2002 Windstar Cargo

1 Answer

2003 Windstar running rough. 80K miles. Misses when auto trans shifts and rpm goes below the''2'' on the dial. Changed plugs and wires. Local parts store did diagnostic and said misfire on cylinder 2 ...

Ad

Question about 2003 Windstar

2 Answers

miss while idle &running miss while idle If ignition is good you may have low compression on one or more cylinders. Have a compression test taken on all cylinders when I start my windstar I get a ...

Question about 2000 Windstar

1 Answer

...Windstar(3.8), misses and stalls only when conditions are cold or moist, but never when dry and warm outside. 132K miles and I replaced the spark plug wires, thinking about electrical arching. My ...

2003 Ford Windstar 3.8 143k rough idle stalls & engine lite runs good after warmed up. Local yokel guessed at leaking intake gaskets. Any thoughts? [email protected] I have a 2003 ford ...

2003 ford windstar. The engine idles fine when you rev up engine it has a miss.ODR II says no codes to report. Problem just started yesterday and car is undriveable you hav a engine misfire

Question about 2003 Windstar

1 Answer

vibration on enjine we instal 3.8 2003 on 1998 end bibreit engine mount maybe is missing.

2003 windstar with a miss and it stalls some times but i get no codes or check engine light. sme times it misses and most of the time it wont. It also stalls once in awhile. Windstar has a problem ...

2003 Ford Windstar, same problem,Ford is covering up the problem. Why My Car Won't Start? - Reasons and Solutions www.myautorepairadvice.com/car-wont-start.html As a rough guideline, problems with the

windstar new plugs wires coil still missing on 2,3 and loses power when accelerating and now a slight rattleing noise from the motor area Have you checked the engine cylinder compression, if not do so

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...