...Taurus Program Codes PO 300 and PO 316 A friend just checked my prgramming because the " see dealer light " came on. He ran a diagnostic and the codes PO 300 and PO 316 were the result. What do these ...
...2003 FordTaurus No one seems to be able to correctly diagnose this problem. I have had the following parts replaced: fuel filter, cam sync. sensor, spark plugs, ignition coil, spark plug wires, air ...
I have a cylinder that is miss fireing. I have replaced the wires and the plugs. Iwas told that it is probably a valve that went bad. Can you still drive with it in this condition? its not recommended
...2003 Taurus, 3.0 engine that has a misfire on #2 cylinder. Replaced all spark plugs, wires, coil, replaced the fuel injectors, crank sensor, cam sensor, still have a misfire on #2 cylinder. It has ...
...2003 Taurus, 3.0 engine that has a misfire on #2 cylinder. Replaced all spark plugs, wires, coil, replaced the fuel injectors, crank sensor, cam sensor, still have a misfire on #2 cylinder. It has ...
i have changed the plugs and wires and I am still having a misfiring problem it is not a steady misfire it is and intermittent misfire. sometimes it runs fine and sometimes it doesn't can you help ...
2003 taurus, it is misfiring, changed wires and plugs.. still misfiring Keep in mind that one MISFIRING fault have several causes; a code P0300 (and other misfirng codes) may mean that one or more of ...
...Ford tAurud 2003 Cylinder # 3 has a misfire...#1) Defective coil on plug or the spark plug itself...#2) Contaminated fuel injector...See drawings below...The coil pack is the smaller of the two and ...
...Ford with multiple misfire codes including this one, check for TSBs. If the P0316 is the only code, then it's time to do a bit more diagnosing of the crankshaft and camshaft position sensors, and ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
