Questions & Answers for: 2003 ford escape lower control

...on a 2004 Ford Escape This is a 4x4 model. thank you. you must take both wheels off remove lower control arm, remove hub via wheel nut and the bearings must be pressed in at a shop or machine ...

...Escape. The front lower ball joint is integrated into the lower control arm. You will need to replace the control arm. The good news is that the control arm is fairly inexpensive $30-50(?). I found ...

Escape 3.0L with 120,000 miles and have had a couple of rattlers. The first was a constant light rattle. It was the sway bar links. The second sounds like what you've got. Occasional rattle, but nasty

whats the name of the bar the lower ball joint bolts into That would be the lower control arm.

...Ford Escape front end vibration Mech replaced outer tie rods lower control arm & front sway bar link...then rack & pinion went out and was replaced week later. Now making noise left front wheel area? ...

to remove the bolt on the knuckle on lower control arm near the brakes, is it under the rubber boot? are you refering to the lower ball joint? if so a pinch bolt is used to hold the ball joint.

2003 ford escape nothing but give it a visual inspection and looks like the bottom part that attach to frame is bent. and when brakes are applied they make a grinding noise. It sounds like the vehicle

2003 ford escape nothing so far,but it looks bent where it attach to the fire wall and the brakes make a noise when applied. just buy the whole control arm assembly , only $80. it will have a new ball

ford escape control arm bushings No more than two hours, but you will need a "pickle fork" tool for the ball joints (if you need to drop the lower A arm), and a few other specialized tools, as well as

...2003 Ford Escape is pulling to the left and feeling unstable despite replacing control arms, stabilizer linkage, tie rods, and CV shaft, consider checking: Wheel Alignment: Ensure proper alignment. ...