Questions & Answers for: 2003 dodge neon crank sensor

I have 2003 dodge neon with code 303 missfire i have replace,plug,wire,coil and taken compressure, code 303 stil coming back help plase thanks SARGON change the crank sensor

2003 Dodge Neon has a pp0340 , 440 codes I think 2003 Dodge Neon has a pp0340 , 440 codes I think it is cam shaft sensor and evap pressure.Looking for some ideas on how to fix them CODE PO340 NO ...

I have a 2003 Dodge Neon SX2.0 We're looking for the Crank Sensor. Where is this located? Thanks Under starter motor

...a reading of 340 on codes machine what can be the problem on a 2003 dodge neon I had this problem at work just the other day. It turned out to be a very worn out and loose timing belt.Good

...2003 dodge neon that cranks but won't start. Sometimes it takes us over an hour to get it running. A few weeks ago we switched the sensors around and it seemed to help temporarily. The fuel pump also ...

...2003 Dodge Neon My 2003 dodge neon Problem with 2003 Dodge Neon My 2003 dodge neon died going down the road. Now it won't start. I have checked all the fuses. It seems to be getting fuel. Didn't seem ...

no crank on my 2003 dodge neon. bought a week ago, and ran great Battery flat or cables loose, fuel not reaching engine possibly due to a clogged hose or filter, TDC Sensor fault.

2003 dodge neon se 2.0 it would start on cold days had a diagnostic run and was told it was my cam shaft sensor and crank shaft sensor got those in and it ran fine that night but would not st ive done

...2003 dodge neon sxt. Will start and run fine then drive for awhile shut it off then it just cranks won't start till it has cooled down The 1st thing that needs to be done here is to have the PCM ...

...up. so decided to check the magnetic adjuster. it was damaged, so i ran the part number, come to find out it was for a 2003 dodge neon. It was not running due to timing out of spec. Get the right ...