Questions & Answers for: 2002 mazda 626 timing marks

...2002 Mazda 626 Timing belt replacement How do I get it back on and lined up correctly? re-install belt, lining up the timing marks, crank to TDC #1 cylinder, cma pulleys have marks on them, line them ...

what are the timing marks for a 2002 mazda 626? on the back of the cams ,two slots that must be horizontal .

2002 Madza 626 4cyl car will not start. Has spark 2002 Madza 626 4cyl car will not start. Has spark to plugs no gas is going to the fuel rail, car was empty of gas there is no fuel reset on this model

...2002 mazada626 4 cylinder. i changed out the timing belt and lined up all the timing marks, but now it wont start. does anybody know the firing order i put the timing marks together gin and it

2002 Mazda 626 v6. as long as it looks like this... however, this only give you base engine timing ignition timing is done with sensors and computers you should refer to a haynes manual for this info,

2002 Mazda 626 v6.If you have the timing marks on the cam drive gears aligned and the motor at tdc on the number one cylinder on the compression stroke will your motor be in time? Hi my husband is a ...

2002 mazda 626 replacing timming belt need to know where timming mark are and where to turn them ///v-6 dohc TIMING MARKS SHOULD BE A NOTCH ON THE CAM GEAR, AND ONE ON THE CRANK GEAR! THEY SHOULD BE ...

...mazda xl v6 timming belt Hi Marina,These diagrams may be a little hard to see, but the cams have a mark that align with the raised "V" on the rear timing cover and the crankshaft pulley has a notch ...

timing is off and it wont start cant find timming marks try this link Mazda 1600 twin cam require position of timing marks on cam pullies

...engine a few times to make sure you have compression and engine turns without getting stuck. See link below good luck. ...