Questions & Answers for: 2000 ford focus fuse panel

...ford focus i have taken the fuse box from inside the glove box and turned it round but cannot see a fuse or a slot where the said 20amp fuse should be as i was going to replace this to see if my ...

Ad

...ford focus zetec 2000, The heater has stopped working on all settings, how can i test it??? The first thing I would do would be to check the fuse panel to see if perhaps the blower motor fuse has ...

Ad

Ford focus 2000. The rear lights that normaly are on when the engine is running, stopped working. At the same time, the lights on the instrument panel went out. The brake lights and reverse lights are

...ford focus 2000 and I was wondering what the fuse number was and where it was located.. I think the number is 63 - but it is crazy where it is located. The fuse box is located on drivers side under ...

Question about 2000 Focus

1 Answer

...ford focus Where is the fuse box on the fouse 2007? i do not have my manual.... because i stuck my key in the cigrate lighter now it doesnt work ! some are located just under the hood on the drivers ...

...2000 Ford Focus Wagon. tail light and instrument panel I have a 2000 Ford Focus Wagon. About a year ago I started having an issue with my tail lights (not brake lights) and my instrument panel lights ...

...2000 ford focus..i have never been able to use the key for the trunk because something is in the keyhole... so i cannot get into the trunk... The fuse that powers this is a 20 amp fuse, #63, at the ...

...a bad relay or some wiring problem on the injector,check wiring and put a volt meter on the fuse panel where the injector fuse goes and see what draw it has,or change the relay.

Question about 2000 Focus

1 Answer

...ford focus 1.6 petrol year 2000, according to the manual the fuse is behind the central fuse box,but I can't get access to it! You have to drop the fuse panel out from the dash in order to get to ...

Question about 2000 Focus

1 Answer

Fuse Panel I have checked the wiring harness leading to the blower motor with a probe light and get no light when I touch any harness contacts. I am thinking that the controls may be bad. I get no fan

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...