Questions & Answers for: 2000 dodge stratus replace valve

2000 DODGE STRATUS 2.5 V6 I REMOVED THE UPPER INTAKE MANIFOLD TO REPLACE THE VALVE COVER GASKETS. I ALSO REPLACED THE SPARK PLUGS & WIRES. NOW THE ENGINE WILL ROTATE BUT IT WONT START. WHEN I CHECK ...

...2000 Dodge Stratus at the dealership. Is this a reasonable charge or not? When you say new engine I have to assume we are talking a manufactured short block engine. Here is a list price of just such ...

valve cover leak is it easy to replace On a V-6, not that bad, calls 1.5 hrs, to remove and replace, on a 4 cylinder labor time is .7 tenths of an hrs.

and the cylinder head. all you have to do is replace the valve cover gasket and spark plug hole seals, its not to bad of a job al the guys in my shop would be fighting over who gets to do it, have fun

...valve cover?-If when the plugs were out, and they used a cleaner, maybe something got into the cylinders that is now burning off-you should contact the mechanic who worked on the car and give him a ...

2000 Dodge Stratus SE with 39,000 miles on it. Stalls when put in reverse and does not re-start for days to weeks later. Already replaced fuel pump and computer 8 months ago and now the car is doing ...

2000 dodge 2.4l timing belt slipped, replaced timing belt and now engine runs rough. Checked compression and 1 and 4 cylinders have 185 and 2and 3 are at 155. Could it be bent valves? Most probably...

...2000 dodge stratus replaced timing timing belt removed cyl head sent to mechine shop got it back putevery thing back together fired up second try i felt like valve cover was getting hotter then it ...