Questions & Answers for: 1999 ford explorer front wheel

...ford explorer can I replace front wheel bearings on my 99 ford explorer or does it need to be pressed fit or special tools involved not press fitted, standard tapered bearings, if 4X4 it is a little ...

tools needed to replace front wheel bearings on 1999 ford explorer 4wd common hand tools.

1999 ford explorer sport squeaking noise when turning or hitting a bump May be dry ball joint or tie rod end. with the vehical suported onjack stands on the suspenstion ( not the frame) with the front

1999 ford explorer Fisrst you want to raise the front end support and remove the tires.Then remove the caliper assembly by removing the two anchor plate to steering knuckle bolts this should allow you

...1999 Ford Explorer XLT, 2 wheel drive,4.0 V-6. I have had this annoying knock from the front end when you drive over small bumps. As time has went by, I have changed the following because they needed ...

...ford explorer and there is a grinding sound that is coming from the passenger side that is constant when i drive and it isn't the brakes 4x4 ? how many miles ? jack front wheels off ground and rotate ...

1999 ford explorer limited whining noise in front end 99 Ford Explorer Limited, 4.0L SOHC, 4wd, Auto. Loud whining noise, sounds like its coming from front end area. Very loud around 40mph or so. You ...

...1999 ford explorer all wheel drive i have already replaced the ball joints and wheel bearings in the front end now its making a roaring noise what could that be without taking it for a test drive i ...

warning beep When I start the engine there is a warning beep that is continuous than it stops. Plus, the abs light is on the beep is normal, the abs means its not working, needs a front wheel bearing,

...Ford Explorer they feel good until just berfore stopping then it feels like a push back on pedal and a bit of chatter like the ABS is coming on. Doesn't feel right. No Problem stopping just doen't ...