...Buick Century. Its due to a bad ABS sensor wiring harness, in my case that is. A few other things can cause the light to come on. If its because of the wiring being bad like in my situation, you ...
buick park avenue removed all bolts exept one , power steering pulley in front of bolt do i remove pulley, how? or do I remove sterring pump, how? You need to poke a small extension with a 13mm socket
...1998 Buick Park Avenue pretty simple really take the belt off and the pulley is held on with a 12mm or 14mm bolt and then put it all back together the way it came apart. hope this has helped you and ...
Need to replace water pump/is there an "easy" way-do motor mounts need to be removed? no need to touch any motor mounts
...water pump-do I need to remove motor mounts or am I looking at it wrong? Shortguts/hints? Well if you have small hands..you dont need to remove that front mount, but it's probaly best you do, so you ...
...water pump-shortcuts/hints? go to the library, they usually have all the books. you can print out what you need It's an easy one. get the new one first and set it on top of the motor turned the same ...
removing water pump bypass elbow MUST REMOVE BELT TENSIONER..
...water pump. Will you give me an instruction how to remove water pump? It looks like I have to remove power steering pump first to access a bolt for water pump. Is it right? YOU MUST REMOVE BELT, AND ...
Question about 1998 Park Avenue
...park brake..put car in neutral use pry bar to try and turn engine over at flywheel area..Or at front of engine at harmonic balancer pulley bolt with big strong ratchet socket ..you may need an assist ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
