Questions & Answers for: 1996 gmc truck front drive

...1996 GMC Sierra 1500 pickup The selector button blinks when pushing Hi or Low but doesn't lock in. I hear a shift noise underneath when selecting Lo(in Neutral), but no shift noise when selecting Hi. ...

Ad

...front U-loint on the drive shaft. the rear seal on the tail shaft must have gotten damaged when you removed the shaft. it is available at any good parts store, easy to change. you have to pull the ...

Ad

...1996 GMC Sierra and I recently put new u-joints in the drive shaft. I noticed tranny fluid dripping from the front u-joint and posted the problem on this site. I was told to pull the drive shaft back ...

...GMC Sierra 2500 with 4_wheel drive. I need to know how to take off the hub that holds the rotor to replace a lug stud that stripped out. Not sure if this year was a sealed hub like newer ones bt the ...

1996 Sierra 1500 and its a got a toggle switch on the dash that the guy said was for the 4x4 but it doesnt like to engage in 4x4 very well, sometimes it takes 2 seconds and sometimes it doesnt at all.

Question about 1996 Jimmy

1 Answer

...drive won't work the fist thing to check is the front drive shaft if it turns freely while in 4wd that means you have a bad transfer case. also check your fuse box make sure the 4wd fuse is not

...1996 GMC JIMMY Check this procedure... Disconnect the negative battery cable. If necessary, remove the air cleaner. Tag and remove the spark plug wires and the coil leads from the distributor. Unplug ...

...gmc jimmy i have changed the actuator,actuator cable,all the vac lines,vac switch and switch on differential and still the front tires dont engage,the transfer case is locking in and so is the front ...

...1996 jimmy after removing the rear hold downs for u joint shaft will not slide forward Hi Todd, I'm glad to help! Todd sometimes when a drive shaft has been on a vehicle for a long period of time it ...

Question about 1996 Sierra

2 Answers

...1996 gmc k1500 that has codes p0700 an p1192 popping up also my truck under a load starts to shake in the front end an looses power the service engine light starts flashing during this when the truck ...

Not finding what you are looking for?

Family Lines:

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...