Questions & Answers for: 1996 gmc sierra turns start

1996 GMC Sierra 1500 truck fuel problem Hello, I have a 1996 GMC 1500 V6. I pulled up to a stop light and it died and wouldn't start. If i put gas into the throttle body, it will start until the fuel ...

...1996 GMC truck with a 6.5 turbo diesel when i turn the key on an wait to start light goes out then turn key to start some times all i get is a click i replaced the collom switch. can you advise on a ...

1996 gmc c/k1500 z71 4x4 my brake and hazzards work but my turn signal don't check the flasher first it may be bad, theres a flasher for hazards and one for signals start therefirst good luck.

1996 gmc sierra will start but wont turn over replaced fuel pump and fuel filter If the check engine light is on, rent a scanner, read out any code(s), and pursue to repair(s). If no ignition along ...

1996 GMC Sierra 1500 XC 4x4 5.7 Hard To Start 1996 GMC Sierra 1500 XC 4x4 5.7. Trouble starting, takes 6-20 times to start. Replaced Fuel Filter, cleaned Dist. Cap/Rotor, Cleaned Carb. type Bowl. How ...

1996 Gmc sierra fast blinking turn signals So, if the head lights r on and u turn the turn signals on they will blink fast! It does not matter if it right or left! If I turn of the head lights the ...

...1996 Sierra just stalled for no reason. Turned over but wouldn't start. The mechanic changed the fuel pump and sending unit, filter was just done. Now it does the same thing only intermitantly. Do I ...

1996 Gmc sierra start wont I have a 96 gmc sierra i have no dash lights and the truck turns over just fine but wont start. i replaced cap and rotor it started right up, when i tryed to start it up ...

...1996 gmc sierra truck turns over just fine but won't start. It was running fine one day and then the next this happens. What is wrong and what can be done to fix it? Sorry no ideas without a cup of ...

1996 gmc safari minivan that keeps blowing the 20amp fuse when i switch it to a/c or defrost can someone please tell me what is causing it to blow the fuse.. Already replaced the resistor and it still