Subaru Legacy 1995. Have replaced the timing belt but have no marks to line it up again. rotate cam pulley very carefully until exhaust & intake valves on cyl. # 1 are closed there should be a dot or ...
...1995 subaru impreza 2.2 Hope this helps! Thanks Hello, I hope this info helps, (subytech1)... There are no timing specs for your model Subaru. The timing is controled with the Electronic Control ...
Question about 1995 Impreza
need diagram of cam marks and crankshasft marks for timing belt set up timing marks for cams and crank they are on the t/belt cover.
...timing belt marks for a 1995 subrau impreza 1.8 they are the notches on the timing gears and they line up with the notches on the black timing covers back. it is a single over head cam? the middle ( ...
How do I line up the 3 gears if I didn't mark them when I took the timing belt off? It's on a 1995 Subaru Legacy 2.2. Thanks. Go to your Auto zone store...they should have a diagram that will help you
1995 subaru lagacy that needs cam seals, I have relative good mechanical skills as in I have removed engines, replaced head gaskets and timing belts. How big a job is it to replace the cam seals? Very
1995 Subaru Impreza L 1995 1.8 AWD 5speed MN) Doesn't matter what engine it is as long as it has valves and uses petrol (not diesel), the camshaft lobes at cylinder #1 should always face upwards. This
i think it jumped time i need to know where the timing marks are on the crank and cams from autozone.com
where can i get a timing diagram for a 1995 subaru impreza 2.2 liter cause it lost its timing Here is a picture of the timing marks...
...timing marks timing marks are guides for when you put in your timing belts to ensure that at top dead center of the piston it should not hit the valves as well as serve as a guide in setting your ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
