Questions & Answers for: 1988 mustang turn

1988 Ford Mustang headlights malfunctioning The headlights started turning off a couple of days ago after prolonged use. now they wont work unless i flash my highbeams. I replaced the lights but still

1988 Ford Mustang. Turn signals won't work I have a 1988 Ford Mustang with a 4 cylinder engine. The problem that i am having is that the turn signal is not working, i checked the fuse and its fine, ...

...i just purchased a 1988 ford mustang 5.0... i can put the key into the ignition and it will turn backwards.. but it will not turn to the on position..help...please.. replace lock cylinder and ...

...1988 mustang i installed a new ignition switch on my mustang, and now it wont turn on at all. When you turn the key it doesnt turn over and none of the acessories work. Like the turn signal or any ...

...1988 mustang gt turn signals brake lights and parking lights and dash lights all work but the head lights wont come on checked all fuses and relays there all good thanks Check headlight lamps... then ...

1988 mustang gt no turn signals ,hazards ,wipers,parking lights all work...checked relays,fuses,fusible links and grounds.....help! More then likely its going to be the turn signal switch itself. With

1988 mustang cant get the headlights or turn signals on my 1988 mustang to work the park lights and breaklights still work Check the turn signal dimmer switch. It is under the steering wheel. You will

we are trying to start this 88 mustang 2.3 4cylinder and when the key is turned the fuel pump don't come on. We know that the fuel pumps relativly new and it ran when we put the car away. Is there ...

1988 ford mustang GT will not turn over acts like it is not getting fuel is it the MAP sensor? It will not turn over or not start? does it gurgle, but not start that is turning over. May sound like ...

...1988 ford mustang 5.0 eng. my grand son has a 1988 mustang we replaced the selenoid on the fender wheel replaced the starter loosened the belt tension the starter only clicks when trying to start eng ...