Questions & Answers for: 1987 ford turn key nothing

...1987 F-250 when you turn the key nothing happens? I have replaced the tumbler , the part where the key goes in. And have been told my prob. is the ignition switch. My problem is finding it on the ...

...ford tempo will start up and then die about 15 seconds later, its not the fuel pump, not the injectors, and not the plugs. Any suggestions? Please help. is your check engine light on? it could be a ...

...1987 ford-150 went to start truck today and it started but the engine was racing to high could not get the engine to idle down so i tried to shut it off by turning the ignition key to off when i did ...

1987 Ford f150. Sometimes when I turn the key on, ignition lights come on but nothing happens. I can jump the solenoid and it will start. It has a new solenoid. Help? probably needs a new ignition ...

I turn the ignition key on and nothing happens, silence. All the power from the battery is on , lights, radio , buzzers working. check to see if you have electricity on both posts of your solinoid.

1987 f150 that has no power with the key in the "on" position. I have 87 f150 that when I turn the ignition to the on position nothing happens then i turn it a little more the ingnition comes on then ...

1987 Ford Econoline motorhome, sometimes key turns and nothing happens but starts fine with jump leads, keep on turning the key and eventually it will start. Can anyone shed any light please Sure, ...

...key to the run position nothing happened.No click no humming, nothing!? Also,the horn the wipers & all the lights work.battery has full charge. I started to undo the bolt that holds the fastener to ...

...the reversed cables on the battery? switched cables, rebuilt solenoid, starter is good, battery shows voltage, but when I turn key in the ignition nothing happens. Check all of the fuses and

...ford laser 1.3liter 1987 does not start. I have ignition lights on but nothing happens when I turn the key to start the car. I replaced the clutch and fitted all of the wires back onto the starter, ...