Spooler wont tern on - HP PSC 1410v All-in-One Printer

Hi, turn EVERYTHING off...... leave it for a good 5 to 10 minutes, then reboot it all up again. it may just need a restart

Since I live in the United States I really don't know but a Google search came up with this.

Tern Path, Glenrothes Postcode KY7 6TN

KY7 6TN Postcode Information
Postcode for Tern Path is KY7 6TN
Town for Tern Path is Glenrothes
County for Tern Path is Fife
Longitude for Tern Path is -3.1802191
Latitude for Tern Path is 56.2145598
Morse code for KY7 6TN is Kilo Yankee Seven Six Tango November

you could have a hydro lock preventing it from terning is the starter good ive had lotsof bad starters directly from the part store check the bat you need 12v and enough amps to tern it over the next thing is check for a good ground if you have a ground thats weak it wont tern over properly

TRANSLATION TO ENGLISH IS:
Battery is in good shape, it has gas, fuses check good in center console fuse center and in front of hood, wen i tern the key i can hair relays clicking but ignition wont tern or start ,check starter and its good. OK then do you have a "security" light on in the dash cluster?

What is the operating system of your computer? Make sure the printer software is installed on your computer (available at http://bit.ly/g1FS2M) If you're using Windows, please check the Print Spooler service on your computer and make sure it is enabled. To make sure the service is running, follow the steps below:

1. Browse to Start -> Run... and type in "NET STOP SPOOLER" (this will stop the print spooler service)

2. type in "NET START SPOOLER" (this will restart the print spooler service)

Try to print again.

there is no code for changing developer. did you change it by yourself our any proper mechanic did that?

A software program responsible for managing all print jobs currently being sent to the computer printer or print server. The print spooler program may allow a user to delete a print job being processed or otherwise manage the print jobs currently waiting to be printed.

You need to go to "services" and enable and set to automatic Click "Start"
Step 2 Click "Run"
Step 3 Type in "services.msc"
Step 4 Click OK
Step 5 Find Print Spooler in the list of services
Step6 Click "Start"
Step 7 Check "Automatic Start"

check if you enabled the sleep timer

I had a bad ground to the injectors, the ground is under the intake manifold