I don't know how to turn of the multishot.It's taking a picture three times at ones

in the home screen double tap settings and scroll using three fingers and double tap general again scroll using three fingers double tap on accessibility and double tap voice over and double tap it to switch off

remove the shifter and verify that the connectors on the bottom are connected

Plasma tvs are tricky for picture. They use two boards to burn the plamsa gas instead of one (LCD)...This almost doubles the price for any replacement boards, unless you know componenet level repair.


Overall, if you can find someone that will work cheap and knows what they are doing...then yes it isn't the most intence repair...but if NOT...then it's probalby too expensive to buy the replacement baords.


Thank you!~

With whats going on it sounds like it could be one of three things. Your power supply has fizzled out, one or more sticks of you memory has died off, or your CPU has taken a plunge off the deep end. It could also be the mother board but most of the time its one of the other three things. Best thing to do is first have the power supply tested, then move on from there. If you can't/don't know how to test any of your hardware then its best to take it to a shop.


Best of luck

Don't know the answers --- BUT

Wouldn't a dealers parts counter be
able to provide you the correct bushings

Worst case -- you take it apart & take the
old part with you & order new ones

hi According to your information, somehow your camera has lens unit defective. Your local repair shop would charge around $ 35 to 75 depend on what really want to charge. Thanks and best regard!

OK, first it doesn't need a charger. Most charger are external types. Battery, it probably uses one (1) CR123A which is a three (3) volt battery, or two (2) "AA" batteries which are rated at 1 1/2 volts each. Batteries you can get them every where, Radio Shack, WalMart, Kmart, Sam's, Walgreen's, One Stop Batteries, etc. The average life for the CR123A is about twenty hours of use, and it probably the same for the double "AA's.

Here how this Famous Trails End NV FT300 Monocular work. The monocular has two button-one for on/off, and the other is for the IR luminations.

.WARNING!!!! This a night vision devise will be used at Night! Don't taking a look see at bright lights or using the night vision devise during the day... Light time.

Now the monocular has a build in shut off for to much light entering the image tube. Don't try it, it works. The more times the monocular NV is subjected to bright lights the more it destroys the thinly film cover over the plate. One it gone, new image intensifier tube and the cost will be about $200 plus shipping and handling.If you just have to take a look see in the monocular. Get a couple of optic lens cover that snap on. The front Optic cover drill about 1/16 in hole in the center of the cap, that it. Now you can take the back lens cover and remove it. Turn your monocular on and take a look through the eye piece. It should be green, if not, take it back the Pawn Shop and ask for a refund.

If you don't have lens covers that OK too. Just get in dark room and point the monocular at one of the corners. Don't point it any lights. It will turn green. I will advise you don't test the auto shut off. You don't know who had first, second or even third time, how it was handed and used. stewbison

The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back. If you don't want the date printed, turn off this option.

The Hasselblad ELM does not need adapting to use the Imacon or hasselblad digital back  the following backs fit on the ELM and can be triggered with a cable that should be supplied with the back. 
Hasselblad V96c 16mp square format back  Hasselblad CFV 16mp square format back with CF slot Hasselblad CFVII 16mp square format back with CF slot + larger screen
the following backs will work but need to have a V adapter plate fitted to the back 
96c 16mp square format back  132c 22mp 645 format back  528c 22mp 645 format back with Multishot option CF-22 22mp 645 format back with CF slot CF-22 MS 22mp 645 format back with CF slot & Multishot option CF-39 39mp 645 format back with CF slot CF-39 MS 39mp 645 format back with CF slot & Multishot option

When fitting and digital back to an older camera the best advice is to get the camera body serviced to ensure that the back mount is correct as the digital backs require a better fit than the film backs did. If the mount is off it will cause back or front focus. 

as far as i know if you see the multi shot icon on the top screen it must function if it is not you're going to have to take it back 'cause you got a refuse piece i would say at least...any way they should change it for you at once or solve your problem in case it was a newly bought camera