Code for tv and dvd

It can't be done. The Sanyo remote is for a standalone VCR - DVD recorder. It has no programming capabilities.

SANYO RMT-U210 TV VCR DVD AUX Remote Control W ...

https://www.ebay.com > ... > Remote Controls
SANYO RMT-U210 TV VCR DVD AUX Remote Control W/Batteries. Shipped Fast With USPS First Class Shipping. Inv 24.

and also

https://www.sony.ca/en/electronics/support/product/dav-dx315/manuals

..

Wall outlet <--- coax cable --> 1-to-2-splitter <-- coax cable --> Personal Digital Video Recorder <-- HDMI cable --> TV

and:

1-to-2-splitter <-- coax cable --> VCR

Check this code {0904}

Go video remote for dvd/vcr recorder combo; you program TV by 2 digit codes. press TV power down when TV is powered on; and input 11 for JVC TV, or 03 for GE TV. You can experiment any two digit codes until TV shut down, then you have just finished programing n150b remote. This also work for all LG dvd/vcr combo recorder remote such as 6711RN203A..

Progressive scan video output would be available on Component Video terminals of dvd player so set connections between TV and dvd player via Component Video cable.
Please intimate model and brand of product that you need instruction manual.
Thanks.

I found the codes by going on line to various sites. I have two TV's a stereo, a DVD/VCR player that I wanted to program a universal remote for.
As far as how many devicces one universal will handle...I don't have the answer yet.
Thanks.

These are the codes printed in the owners manual for your dvd/vcr player.If they do not work you will have to contact Emerson and ask them for help getting the code. The contact number should have come with the instructions for the remote. Just give them the model number of you remote and the units model number and they should be able to help you. I hope this information helps you with your problem. Switch the input selector on your TV to an appropriate external input channel (usually near channel 0).
Press a button on the TV’s original remote control that selects an external input channel until the DVD
recorder’s picture appears. Check your TV owner’s manual for details.
Admiral
Curtis Mathis
GE
Hitachi
JVC
Kenwood
LXI-Series
Magnavox
AUX
LINE1, LINE2, 00, 90, 91, 92, 93
INPUT, TV/VCR, 00, 90, 91, 92, 93
INPUT, AUX
VIDEO, VIDEO 1, VIDEO 2, VIDEO 3
AUX
00
AUX CHANNEL
Input Mode Names for Common TV Brands (Example)
Panasonic
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
Zenith
TV/VIDEO
INPUT, TV/VCR, 00, 90, 91, 92, 93
TV/VIDEO
VIDEO
00
VIDEO1, VIDEO2, VIDEO3
TV/GAME
00

You can record (dub) a dvd to tape. Also, you can record tv programs using the internal tuner (recording to the tape, not the dvd). Remember, this is not a DVD recorder but rather a DVD player. If your question is relating as to how to do this, refer to your owner's manual. If you've lost the manual, I can email it to you.

I have a GE universal remote and have lost the manual it came with. I need to program it to my AKAI TV set but don't have the code or instructions. Can you help?

The RF converter takes the Red/White/Yellow as INPUTS and converts them to either channel 3 or 4. You need to go the other way. You need a tuner or another VCR to convert from RF (channel 3 or 4) to a standard AV signal (Red/White/Yel).
Dan