Question about HP PSC 1315 All-In-One InkJet Printer

2 Answers

HP psc 1315 Scanner won't scan

I've finally set it up, but now it refuses to scan. When I try to, it says that some other program is using it. Tho I do not remember activating another program, the printer says I did. How do I know what program to close? Please help :P

The printer is an HP psc 1315 All-In-One ...

Posted by on

  • 1 more comment 
  • dattebayo123 Aug 02, 2008

    :P thanks guys.. but.. i just restarted the computer... solved everything... tho i did have to reinstall the drivers before i restarted the computer (but i already did that before i posted the question)

  • banjossgirl Aug 02, 2008

    AARGH I have the same problem!! I've uninstalled EVERYTHING to do with HP and reinstalled it, rebooted several times and still get the same message.

    Please please help as I'm trying to scan some pictures for my brother's 60th birthday present!

  • darquea Mar 14, 2009

    I have a I mac osx and a hp 1315 all in one printer scanner. I can't get it to scann. Message says it can not find scanner

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 191 Answers

All you need to do is remove the driver from the control panel in add/remove program reboot the system and then freshly install the driver which will take care of the issue. for further assistance please post message. all the best.

Posted on Aug 01, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 659 Answers

Good stuff glad to hear ushally the simplest things are what fixes them

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix my phone from going straight to answering machine


you need to program it to what you want. I have mine set up for the answering machine to pick up after the 4th ring.It was very easy to do,but I've had this phone for so many years now,don't remember how to do it. The manuel tells you how to program tho:)

Jun 29, 2014 | Uniden 5.8GHz Expandable Cordless Phone...

1 Answer

Standby/Hibernate


Have you tried or are able to use system restore to go back to a earlier date before this issue?

May 28, 2012 | HP Computers & Internet

1 Answer

Skipping cursor is the main prolem


Hi Jack, thanks for contacting me to help you. Well, I have few questions since you didn't specify anything in detail; What is the operating system installed on your computer? e.g. Windows xp or Windows vista or Windows 7.... What antivirus program is installed on your computer?
Still have questions, but let's proceed anyway. I don't think this it will be a good idea to set up remote connection and most of all, it looks like we are in different time zones (I am in India).
Please follow the instructions given below:
Hardware; For hardware issues, please try to install another mouse on the same system and check whether the same problem persists or not.
If your mouse has a driver, please uninstall and reinstall it.
I would also suggest you to place the mouse on different mouse pads, never place on table or on a plastic type surface. This is to verify that there's no hardware issues.
Software/Virus;It would be a pleasure if you could let me know when and how it happened. In most cases, it hardware issue, but in rare cases, viruses cause this problem. Make sure to scan your computer using different types of antiviruses. But remember not to install multiple antivirus programs at a time. If you've finished scanning with Avira and the problem persists, then uninstall it and then again download and install Avast. Download Links are given below. Malwarebytes is also a recommended program for the same problem. I hope you can still install programs or run .exe files.
I would suggest you to scan your whole drives/computer in Safe Mode. With Avast you can even Scan in Boot Mode means during startup...
The following are the download Links..
Avira FREE
Avast FREE
Malwarebytes FREE

Good Luck.
Let me know if you need further help..
Note: All Programs I've mentioned are Free Versions and of course approved softwares, once installed, don't forget to update before running the scans.
Thanks for using FixYa.
Regards,Nonontech.

Sep 29, 2011 | Computers & Internet

1 Answer

How do i flash my htc incredible to my boost mobile service


You'll have to call them and see if they'll do it. Problem is. Yes Boost is owned by Sprint. However. They refuse to offer any support and flashing of phones. Why? I don't know.
I've had quite a few Sprint phones, tried to activate to my account, and they refused everytime.
Good luck. I hope they do it for ya

Aug 24, 2011 | HTC Cell Phones

2 Answers

My hp 6500 is refusing to scan but I don't know why.


please try to scan from the following file and check if you are able to scan

  1. Go to the location C:\program files\hp\digital imaging\bin folder
  2. Locate and double click on hpqsciapp.exe to activate scanning application.
  3. Click on scan to scan a picture.
if you are able to scan from this file and unable to scan from solution center then get back to me with the exact error message you are getting and operating system.

Oct 13, 2009 | HP Officejet 6500 Wireless All-in-One...

1 Answer

Lexmark, scanner asks for pin code and won't scan without it.


This drove me mad for about 2 hours (I've just experienced the same problem), but have finally found the solution!

Firstly, it depends on what Lexmark you have (as different printers use different software)...

For my Lexmark which is an S600, I went into the program 'Lexmark home' which was in the lexmark folder on the start menu and in my lexmark software folder, went to 'settings' and then 'Network computer name'. From here you can set the pin.

According to people experiencing this problem with other Lexmarks, you can do this via the equivalent 'productivity suite' program through 'network settings'.

Hope this helps.

May 17, 2009 | Lexmark X6650 4-In-One Wireless InkJet...

2 Answers

MC50 scanning engine


http://www.symbol.com/ is who you should goto since it is a enterprise device. Not many people have the dev kits for these devices.

I only have experience with mc9000. I know when it refuses scan (or activate) is has to do with the software being used to communicate with the scanner itself. Re flashing the device usually fixes it.

Aug 22, 2008 | Symbol MC50 Portable Terminal

1 Answer

Epson CX4200 scanner


1) In the program you are working from, begin the scanning process. If working in FULL AUTO MODE as the scan begins click PAUSE or CANCEL, then change "Full Auto Mode" to "Home Mode".
2) You will now see all Epson Scan settings displayed. If the scanner has not previewed automatically, click the large preview button to get a visual of what is on the scanner.
3) Ensure the settings on the Epson Scan are correct for what you wish to scan.

Jul 10, 2008 | Epson Stylus CX4200 All-In-One InkJet...

4 Answers

Lexmark X1270 scanner problem


The only way i can get my Lexmark X1270 to scan is to use the Windows Vista "Windows Photo gallery" to scan :

Start > All Programs > Windows photo Gallery > File > Import from Camera or scanner > select the scanner > save scanned file to your computer

This is the only way I have been able to use the scanner on my lexmark X1270,hope it works for you too.Be lucky.
FossyBear

Dec 11, 2007 | Lexmark X1270 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

Related Topics:

3,024 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...