HOW DO I REPLACE A INLET FILTER ON A NEBULIZER 626

Replacement filters for Inspiration 626, MisterNeb, and Inspiration Elite. Replace air filters every 30 days or when they become dirty or grey

I would suggest that you take this to the repair depot and get it looked at. I don't have a nebulizer like this, so I can't tell you where it is in the unit. I would guess that it is near where the hose comes out of the box.

Change the filter, replace the neb kit and cup, that should help.

For the nebulizer would be to boil water and soak them in the boiling water for 5 minutes.

You can buy a filter for a nebulizer at just about any pharmacy. Just to be on the safe side, I'd make a phone call before I drove to the pharmacy. If you were asking where you could buy a nebulizer filter online, go to opentip.com, csnstores.com, jrsmedical.com, amazon.com & the list goes on and on. I hope that helps!

The tube from the medicine is probably blocked. Generally needs factory service.

you need to change the filter

look up respironics.com you may be able to use the e-learning

From Pari.com:
What is the best way to clean and disinfect my PARI Nebulizer?

Cleaning: After every treatment, thoroughly rinse the nebulizer to remove medication. Hand-wash with warm water and dish soap. Rinse thoroughly. OR... Wash in the dishwasher using a dishwasher basket on the top rack.

Disinfecting: (done after cleaning) every 2nd treatment day, mix a solution of 1 part distilled white vinegar and 3 parts warm tap water in a clean bowl. Soak the nebulizer parts (except the tubing and mask) for 60 minutes. Rinse thoroughly. OR... Mix a solution using Control III® Nebulizer Disinfectant and soak for 10 minutes. Rinse thoroughly. OR... Boil the nebulizer parts for 10 minutes.

Source: http://www.pari.com/pdd/pdd-faqs.htm

If your unit is the one pictured, he cup with the medication can be taken apart to be cleaned... the top unscrews and the nebulizer comes out....and should be done so after every use. Do not use house hold chemicals to clean the unit. Use a water/distilled vinegar mixture to clean, then rinse with clean water.