I have a Samsung HT-TZ325 home surround system. For some reason something has gone wrong with the sound settings. I can hear the background sounds and music but the speach of the characters is really low and you can just about hear them speak. This is the same for my sky and blu rays. I have connected my sound system via a hdmi lead to the sky and use an optical lead for sound. Can you advise?

Check the audio menu to make sure the surround sound is on. Check to make sure the audio out cables are connected properly to the HT-E350K and the Samsung.

I have the same problem. HDMI connection and the sound just stops. Very frustrating

you need an optical cable to hook up to your dvd player to your sky box

With the home theater system off, press the 0-1-3-5 buttons in that order on the home theater's remote control.

Power on the home theater system.

With the wireless module on, press the [ID SET] button on the back of the wireless module for five seconds.

If your home theater continues to display rear check after you have tried the steps above, call Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864). Have your model number and serial number on hand to set up service.

Hope this helps!

press the MODE button until you see MATRIX

it has something to do with the audio setting of the unit

Hi,
You need to connect your TV to the AUX connection in the back of your HT system. Then set your HT system on AUX 1 and wait about 5 seconds for the TV sound to come through. If it does not work on AUX 1, you may have to try on AUX 2 or AUX 3 settings on your HT system. Make sure the A/V cable you use is good and in working order and is a good quality cable.
Hope that helps, Gary

genarally tv output contain two signals.(steereo).it dosent have surrund output.thats y its not hearing surround sound from your system.

How can I get surround sound to work on my tv. When I pull up my menu and go to audio the SRS Trusurround XT is not in bold so I cant figure how to connect it so I can have the surround sound coming from the system and not from the tv. Please help.

if ur surround hasnt got digital in then it wont work also its better to use the red white and yellow wire, i have hdmi and them wires hooked up and i have sound through everythin all i have to do is put it on aux 2, try it out

You have the mode selector for the surround sound on the wrong switch setting. Look at the owners manual to see what setting you need for synthensized suround. Go to http://www.samsung.com if you need an owners manual. You will find it with a little bit of searching. Good Luck