I was going to sychronize some songs on Windows Media Player,but when I put in the my MP3 it said 'USB device not recognized' so I looked around,tried reattaching the MP3 a few times and it still didn't work.The worst part is the when I took out my MP3 it still had a blue screen that said 'MTP Connected'.I tried turning off the device and it wouldn't do anything.My MP3 was working fine before I had connected it,also.So what can I do to get my MP3 working again?Or should I just replace it?
If your computer is windows xp Go into your control panel, press system, then hardware, then device manager. Your mp3 player is the item that should have a yellow ! next to it. Click it then up the top of the box there is a computer with a cross through it. Click that then press yes and let it uninstall, then unplug your mp3 player then plug it back in, re-install it and voila!
You have to try diffirent ports on your computer also take the battery out and put it back in, and if there is a reset button reset it.
Concerning the GPX mw3836. I had the same problem. Mainly because I pulled the Unit off the USB cable while it was still active. Evidently it's not like a thumb drive where you can yank it out immediately after file transfer is finished. It's too delicate. Be sure to deactivate it before disconnecting. Shutdown the computer if you must to be sure. Inconvenient yes but effective. My solution was to buy another one and not make the same mistake. It works fine on a system using MTP Media Player 10. I gave the old one away to someone using a newer system. I'm using Win 98-SE and have no desire to update, but problems like this are bound to come up with newer gadgets.
Press the hold button and keep pressing volume(+) for few times then start it.... it works. me to got the same error.
This error can occur when the actual memory stick is physically broken.
http://www.mypchealth.co.uk/USBMem.php
Has advice how to go about repairing a memory stick
I have Vista and I'm not really sure if I did this right, but it totally worked for me. I have a Creative Zen and when I went to use it for the first time, my computer wouldn't recognize the device. So, I tried plugging a simple memory stick into the USB and my computer wouldn't recognize that, either. This is what I did to fix it:
1. I restored my computer to a date before I installed the Creative Software (I'm not sure that this is a necessary step, but I did it just to be sure). You can get directions on how to do this from the Windows website. Make sure you backup or save any data that you don't want to lose and that was added after the date to which you are going to restore your computer.
2. I went into Device Manager (in the Control Panel) and uninstalled all the Universal Bus Controllers that had error messages. I did this simply by right-clicking the error message (It has a yellow triangle with an exclamation point next to it)
3. I went into Add Hardware (also in the Control Panel) and started the Wizard
4. I selected to add hardware manually
5. I selected IEEE Bus Host Controllers and reinstalled them.
6. I reinstalled the Creative Software
I hope this helps!!!
Can u help me? i plugged my usb cable and then it is said that "usb device not recognized". because my mp4 is low bat and i want to charged it. when i plugged the usb cable it charged and then it turns off by itself.. help me to fix this problem please! =(
Open tha player n try to replace the transistor v 12-44895-13 cuz its the first responsable of memory transfert to the PC, the problem must be resolved...
Is easy
When connecting to my pc via usb, i would get the connection sound but couldn't find the drive in "my computer". i just connected to a different usb port as suggested above and it worked :)
For MP3 players that directly attach to a USB port i.e. without a cable (I have the Samsung 512MB YP-U1), the 'USB device not recognized' problem can be fixed by buying a USB cable (male/female) and using it to connect to your computer. I suspect the flimsy rotating USB connector on the MP3 player is preventing a proper connection. I tried using a cable and it resolved the issue immediately and I've never had a problem since!
I solved the problem on my win98se OS by
using the drivers from GPX from another mp3 player ( MW6347DT ).
Before, it did not find the pci to usb drivers, etc. Now, all the
proper drivers are being found.
The MW6347DT driver for win98 can be found here:
http://www.gpx.com/download_prod.php?id=...
I solved the problem on my win98se OS by
using the drivers from GPX from another mp3 player ( MW6347DT ).
Before, it did not find the pci to usb drivers, etc. Now, all the
proper drivers are being found.
The MW6347DT driver for win98 can be found here:
http://www.gpx.com/download_prod.php?id=...
You should go on Settings, USB Mode, then go on a diffrent USB mode. The blue screen remaind because you pulled the cored without disconnecting it withe the Safely Remove Software button on your computer. You can try to hold down the button for 50sec to restart the MP3.
That was great advice. All I did was take the battery out and put it back in ........ thank you so much Kerry Moevao
Put in a new battery. Worked for me.
Well try this site this might help. They have good explanation of the problem and they got tips how to fix it.
http://securityblogs.systemsecurityinstitute.org/node/9
I had a the same problem with my mp3 player. what i did was connect the device to a different computer. The device was recognised and then I reconnected it to the other computer which could not recognise my mp3, and it worked!
Dont ask me why, I tried all the above but nothing worked for me. It may have just been lucky...but give this a go before u decide to buy a new device or cable.
(if u dont have a second computer this wont work ha).
I have 2 faulty samsung z5s with this problem. They also both do not hold a battery charge well.
I am wondering whether the usb connector is not getting enough power.
Do your players hold a good battery charge?
36,032 views
Usually answered in minutes!
have the problem help me [email protected]
when i plug it in the computer it's still says ''connect a device'' i would try several times but it wont do anything. can somedy help me please??
[email protected]
my screen just flashes on and off no other response
Same as above. After loading songs, device does not do anything. By taking battery out and putting back in, it just shows "San Disk" on the screen and does nothing. Same with connecting with computer.
My Telefunken mp3 player was fine until I wanted some new songs and I pluged it in the computer and then on the screen popped up something that said ''USB not recognized''. So I clicked on the pop up and tried everything that was recommended but nothing worked.What can I do? Plz Help!
my GPX mp3 player have the same problem, any help is welcomed
USB Device not recognized, when I plug in my mp3 player, what can I do?
when i plug it in, it tell sme to connect a device but the screen flashes blue adn says that its connected to a USB.
Upon attempt to sync creative zen plus MP# message USB device not recognized. Trying to sync to Napster. have attempted to reload software, have attempted same on another computer with same resulting problem, seems problem is internal to creative zen device. Greg
usb divice not recognized
same problem
I need a Software for this
I have the same problem I can no longer sync any music and the buttons stick sometimes mine is a RCA M 5002
Buslink MP3-SK512 not recognized in win xp usb port
my zen creative says usb not reconised
i ve a JNC SSF-8100 player.i cannt find my mp3 player in my computer.. and the player doesnt working either... can u plz help me! my id is [email protected].
my computer just won't recognize my sans no matter what I do, and I don't know how to remove it safely without it recognizing it.
my mp3 is connected to my computer but everytime i try to open the files and add my songs,pics,etc it wont let me! the window is still open and is trying to load my files in the mp3. im afraid its worthless, should i get a new one or can i easily fix my problem?
device will not turn off and screen is frozen with no sound
tried to reboot product to usb port with no help
the first time i put the device into my computer it worked fine but when iwent to change my songs it said an error has occudred and that an error has occured durring installation and that it may not work properly. my mp3 still works fine just it wont work with my computer. i have figured out that my computer recognizes it but then the computer tells me the error again and it keeps repeating this as long as the mp3 player is inserted it the computer.
the first time i put the mp3 player in the computer it worked i do have songs on it. but when i went to change my songs it would not work. the computer would read the mp3 player and say that mtp is connect then say a problem has occured durring installation and would keep saying it over and over again. i tried different ports and the computer just did the same things again. my mp3 player works but i cant change my songs or delete them.
When i switch on. it turns on with logo and blue comes and switchs off. Please help me fix in the problem.
when i connect it with computer it appears USB not recognized
zen creative not reconised through usb port. all softwear has been loaded
USB Device not recognized
usb not recocnised
Hello. I have ajwin mp3 player. when i insert it the computer says no device detected and makes a funny sound. I have Windows Media Player. What to do? Notiffy me at [email protected]
when i was putting my mp3 player this message came up saying that it didnt recognized the usb cable
dakeyi
my mp3 player the usb does not recognized can u help me fix this
not recognized usb device
For my MP3 player - "Device not recognized"- "unknown device" in the device manager... what to do? I'm with XP and it shouldn't need driver. And on other computers with XP it works!!!
I lost my CD with MP3 player Driver
Help, same problem, but my pc not recognising the usb devise/MP3 at all, it is there on my hard drive, but when I go to download onto the MP3 I get asked to troubleshoot etc. Does anyone know where I can get a driver for the Telefunken 1gb MP3 Player?. Thanks
USB device not recognized keeps popping up on my screen I can not find the source that is not recognized ,The only thing we have plugged into USB cable is our mouse and the printer ,both are working fine. How do I fix this pop-up?
USB bot recognize
USB is not recognize
I got the "usb device not recognized" when i plug anything into my toshiba tecra e8, i thought it was my device "ipod" but it works on other computers, i tried everything from unistall, to restart, taking the batter out, blowing air, leveing it unpplugged for hours, and still get the same message, and its not only with my ipod but also anything that i plug into the usb. please if any info cantact me at dominicanslim@yahoo. subj:USB, i have am loosing my mind, and dont feel like paying $100 for something that could be very simple and i can do myself.
i have music on my mp3 player but i tried to connect it to add more and the player is only recognized under the my computer manage. but not in my computer. and ive tried to update the device and even reset..but it still wont show what do i do?
when i plug it in my freinds computer it pops up but when i put it to mine nothing pops up
samsung up-u3 madeldagi mp3 ga muzika yozib bo'lmayapti nima qilish kerak kim maslaxat bera oladi
×