No network coverage signal - Cell Phones

Yes, the SIM card must be activated in order to see the signal coverage. If it is not activated it will not communicate with the network.

Nokia c2 00 phone say no network coverage problemjust make jumpaer v- vat to pf.... power ic or pf is always ok in ths problm

First Option:
Phone in the Other Sim and check the Phone Network Signal If Network Signal Problem not Solved So
Secend Option:
Your Phone Network IC Fault So Please change Network IC
And Network Signal Problem will Solved
if it is there isn't much you can do on this side of the network.
Contact your phone company

Hi,
Are they the same models?
The phone's capability to sustain a stable network coverage may vary even in model types.
While at your home,remove the phone's battery and simcard and fit them again.
Note how the phone's network signal registers.
It may start very high and then drop drasticaly to very low or no signal at all or sustain a constant signal reception.
If the reception's good in other areas,then your home area's network coverage may not be that good.


Hope this helps.Thanks!

This probable if your Network does not have 3G/UMTS coverage in that specific area.

I would set your phone so that it will automatically select 2G or 3G network services (e.g. often referred to as Dual-mode) so that if 3G/UMTS is available and has the best coverage/signal, it will automatically be selected. Setting UMTS coverage only would be very restrictive in many area as the signal is usually weaker (especially in Buildings).

Hope it helps!

Welcome to FixYa!

It means that there is no network coverage in your area. In most cases, your operator or service provider is the best source of assistance with issues regarding network coverage.

When you are in outdoors, move your position to find a good signal network coverage area. When you are in indoors ( like building, basement and subway station), change your position by small spaces, or move towards a window.

If other mobile phones with the same operator or service provider as yours does not have a signaltoo, then it is conclusive that there is no network coverage.

If other mobile phones with the same operator or service provider as yours does have a signal, then you need to upgrade your cell phones firmware. Unfortunately, there is no upgrade available from Samsung's Website http://www.samsung.com/in/consumer/mobile-phone/mobile-phone/cdma-phone/SCH-B209ZKAREL/index.idx?pagetype=prd_detail&tab=support


Samsung B209 uses CDMA Technology at 800Mhz frequency. If your operator or provider uses GSM Technology, then your phone will not get any signal.

Thank you for using FixYa.

Have a great day.
Jas247

Welcome to FixYa!

It means that there is no network coverage in your area. In most cases, your operator or service provider is the best source of assistance with issues regarding network coverage.

When you are in outdoors, move your position to find a good signal network coverage area. When you are in indoors ( like building, basement and subway station), change your position by small spaces, or move towards a window.

If other mobile phones with the same operator or service provider as yours does not have a signal too, then it is conclusive that there is no network coverage.

If other mobile phones with the same operator or service provider as yours does have a signal, then you need to upgrade your cell phones firmware. Unfortunately, there is no upgrade available from Samsung's Website http://www.samsung.com/in/consumer/mobile-phone/mobile-phone/cdma-phone/SCH-B209ZKAREL/index.idx?pagetype=prd_detail&tab=support


Samsung B209 uses CDMA Technology at 800Mhz frequency. If your operator or provider uses GSM Technology, then your phone will not get any signal.

Thank you for using FixYa.

Have a great day.
Jas247

Hi kccute61,
Network connectin does not depend on the mobile model, it depends on the connection service provider that you have, Network coverage will not be there if you are in a place where for a few miles there are no tower of your service provider, if you are in a place where there are proper power signal and still you dont have proper network coverage then check whether you are in a closed room where no signals can enter, you will get the connection once you come to open places where your mobile will sense the signal,,,,,,,,,

Please leave me comment, if you need further assistance

good luck with your fix,,,
have a nice day,,

A VERY HELPFUL RATING IS APPRECIATED,
Thanks
Regards
Arul

Network IC Problem. We also faced the same problem here. The Signal Bar shows Full Strength for a few Seconds and immediately drops down to Zero Strength but it Displays the Operator Name.

i had no display on my nokia 3230 cellular phone. now its ok but it has no network coverage/no signal . plz help me..... .