I have lost the manual and need to obtain a site where I can read it. I need to attach the heavy duty (metal) weed 'blade' but I don't know how to attach it and I have lost the parts needed. I need the manual in English.

Don't worry I'm sure you will get the solution of your problem, just check the link I attach-

Best Manuals

Search Results

7" Job Site Tile Saw with Laser - RIDGID Professional Tools

https://www.ridgid.com/us/en/7-inch-wet-tile-saw-with-laser

Ridgid7" Job Site Tile Saw with Laser. ... Heavy Duty Arm - prevents flexing while keeping the blade aligned; Guard Baffle - reduces air turbulence to help keep water ...

[PDF]7" BRIDGE TILE SAW

manuals.harborfreight.com/manuals/97000-97999/97360.pdf
7" BRIDGE. TILE SAW. WITH STAND. Owner's Manual & Safety Instructions. Save This Manual .... that has an outlet that looks like the one illustrated above ... Use saw-blade guard and spreader for every .... arms and shoulders. To reduce the.

[PDF]10" INDUSTRIAL TILE/BRICK SAW Owner's Manual ...

manuals.harborfreight.com/manuals/69000-69999/69275.pdf
parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. 11. ALWAYS USE ... an outlet that looks like the one illustrated above in Figure A:... For Your Own Safety Read Instruction Manual Before Operating Saw. 1. Wear eye ..... Connect the clear water Hose from under the arm of the Motor ...

SKIL 7" Wet Tile Saw 3540

Dear Terri Moogalian,
in order to obtain an instruction manual for Singer 4443 you have to purchase it, according to the official site.
Here's the Quick-Start Guide, if that doesn't help check the attachments below to find the information you need.
4443 HEAVY DUTY
SINGER 4443 Heavy Duty Sewing Machine

You can't use the blade on most string trimmers unless you have a brush cutter style then you would unscrew the trimmer string head and attach the blade with the adapter that came with the unit.

It is called the Bowl support. It is part #4 on the diagram in the. Instruction manual.. I

use an AC powered mototool and the little circular carbide blades made for it. stack two blades on the shaft for strength and,
you can cut right through the hasp or. case with it

Swingline heavy duty staplers provide the power to staple up to 120 pages of 20-lb. paper easily and consistently. The all-metal construction of these staplers makes them an indispensible office tool. However, the way to load staples into a Swingline heavy duty stapler differs from the method for loading most other manual staplers and can cause a little confusion.
Difficulty:Easy Instructions

1. • 1 Remove the follow block at the back of the stapler by pushing the mechanism in, lifting the block up over the holding hooks and sliding it out from the stapler. The follow block is the spring-loaded mechanism that holds the staples in place within the stapler.
     
   • 2 Load the heavy-duty staples into the staple tray.
     
   • 3 Replace the follow block by inserting it back into the stapler and locking it into place over the holding hooks.
     

Read more: How to Load a Swingline Heavy Duty Stapler ' eHow.com http://www.ehow.com/how_5822366_load-swingline-heavy-duty-stapler.html#ixzz1bVwG5bBn

40:1 mix, 3.2 oz of 2 stroke oil for every gallon of gas.
Link to the manual is below
http://www.poulanpro.com/ddoc/POUO/POUO2001_USen/POUO2001_USen__530088910.pdf

Make sure the saw is unplugged. Raise the arm to the upper postions and raise the blade guard by loosening but not removing the guard screw. Depress the spindle lock button and use the provided wrench to loosen the blade screw.
A full discription, with illustrations can be found on pg 6 of the user manual. In case you have misplaced the manual here is a link to the pdf from Dewalt.
http://www.dewalt.com/FAQs.aspx
click on obtain parts lists and manuals, click the highlighted ServiceNet link and enter your model number. Click the pdf icon next to manual and open the document.