Set up Wii with my yamaha rx-v563. Sound but no video using hdmi out to tv and component into receiver

Well I'm guessing you want to play your playstation through HDMI? If so are you currently using scart lead red white and yellow. What you have to do is use the scart lead red white and yellow and connect to the tv and connect the HDMI to the Yamaha as you do already. Turn on using tv go to Settings>video output change to HDMI then done

The remote has nothing to do with this.

Get into the manual. Page 14 says Component Video In will go to Component Video Out, not HDMI. No analog-digital video conversion is implied.

I am trying to connect my Wii with the component cables to my yamaha rx-v367. No video but sound. What am I doing wrong?

This receiver doesn't support processing of video signal, only switching. This means that it can output only the same format of video. Only some more expensive models do upscaling from component/composite to HDMI out.

From HDMI out, you can output only signal that came via HDMI in 1-3. For component out, you can output only component in. The same for composite.

So in order to use wii through receiver to TV, you must connect receiver and TV also via the component cables.

Or other option is to connect component from wii directly to TV and connect only audio to receiver.

Max does recognize receiver over HDMI-CEC.
The problem is that DVI output is for video only. Macbook won't (and can't) output audio via DVI. So yamaha receives only video signal via the HDMI connector. You can check that by pressing Option button on yamaha remote and choosing Signal Info - you will see info about video, but no audio signal present.

check in the manula setup from the Menu button and press enter it should show front speaker enabled

Hi..
If youre talking about the set of 3 A/V plugs in the front then you need to connect to the Video Out (yellow) plug in the back that says something like "Front Video" or "video 3" out. Connect that to the display.

I would check your center speaker wiring and setting. Then switch to a different audio setting (pro logic, theater...)

Check the settings on the receiver. You may need to switch the dvd from analog to digital or hdmi.

Just a thought, but, how do you have your TV/Monitor hooked up to the Yamaha unit? If your only connection between the receiver the and the TV/Monitor is an HDMI cable, and you are plugging your WII into the front v-aux jack using composite video, the receiver will have no way to send the video signal to the TV/Monitor. The receiver upconverts all composite video and S-video signals to component video signals. This means that if you only have an HDMI connection between the receiver and the TV/Monitor, you will also need to establish a second, component video connection between the receiver and TV/Monitor to handle the upconverted WII video signal. You will probably also need to switch your TV/Monitor to use that input when you are using the WII.

Of course, if you already knew this and have it set up that way, this answer won't help you at all!