What are the official dimensions of an indesit wg1130t

You can find a manual online. Indesit service at:
www.indesitservice.co.uk/manual/

claims to have downloadable manuals. There are also other manual sources. These should be able to provide the dimensions you require.

Good Luck,
Pete

Dell Dimension 8250 Drivers
Visit the above link from Dell Official Support. Click Audio, download the files and install.

CreativeTECH

The audio drivers for Dell Dimension 8300 are here. I have to inform you that there only WinXP officially compatible drivers.

In case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios

follow these steps:
1.go to the official site 
2.select your device
3.download the sound driver for windows 7
4.instal the driver
5.restart 

I had exactly the same problem. All seemed ok, except no spin. I followed Shaun's advice and replaced the module board. Cost of about f£23 from ebay, but similar price on espares.co.uk. Fixed it. Thank you.

It appears your Pressure Switch or timer/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

you can have just cold but you will need to have both hoses, (presuming it's hot and cold fed washer), connected to the water otherwise the machine will be waiting for the water to flow that isn't there. you can buy 'y-shaped' adaptors for this purpose.
the water is heated inside the machine to correct temp anyway.

Just take a tape measure and measure the outside dementions.

DRAIN PUMP BLOCKED OR FAULTY

maybe the drive belt is off/broken. Take the back off to check