Spring fell off inside rd-l541 - Shimano Xtr Mountain Bike Dual Control Brake/Shift Levers

Try spreading out clothes

This belongs in Fishing Reels, but why not either Google "Shimano Reel parts" or just buy a new one?

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

the shock may have broke or came loose or the spring broke and fell out,take a look at the springseats at the top and bottom to make sure they are not rusted or broken then look at the shock if nothing is broken or missing bolts then the spring just broke and fell out,

I believe their is another part missing when it fell apart. But it is better if you replace it with a new one.

COMPUTER REPAIR SHOPPE

1751 Lower Roswell Rd
Marietta, GA 30068

ph :770-578-1312

The button is locked into the mirror shoe by a flat spring. Find the notch at the bottom of the shoe and insert a small flat screwdriver to push the spring away from the button. Some force may be required.

I have one and the spring is to open the intake and exhaust door.

I was having a similar problem. After finding the service manual (4402_X73.pdf) and taking the thing apart, an ink-covered broken spring fell from the inside. I checked around the 'Maintenance Station' and found the other half still hanging. Apparently -because I haven't got a replacement yet to confirm- the spring goes across the bottom of the 'Maintenance Station' to a lever on the other side. If someone can tell me where to post a picture of the thing, I'll gladly do it.

if a little steel ball also fell out then u need to find it that is the tension for your gears, if nothing fell out then the retainer inside the unit is out of place when you replaced the spring. you might need to have the unit serviced

are you saying the spring to the door fell out and this is the second time??? how was it replaced the first time as a spring should not just fallout unless its dropped and a boss is broken off. ( a boss is a small plastic piece that would hold the spring in place.) This is a hard call unless you get the mechanical diagram as I dont have and they are all made differantly.