Cyclop-1b doesnt work in the dark. whats the problem how can i fix it?

Not to many places are around anymore that I know of that fix appliances whether it's a flashlight or whatever, unless you know somebody personally that fixes items on the side as a hobby like myself. Maybe sometimes the company of the product offers a repair or replacement. But sometimes the cost of that process out ways the cost of a new one. That's partially the reason most places don't repair. Back to your question.

The Cyclop-1 is Russian manufactured. Go to Night Vision Optics web page and see if they have manual on this one eyer to down load. As far as parts go, They will not sell you parts. I really doubt if they have parts. What parts are you seeking for this Cyclop? GB...stewbison

Hello, is the IR glowing red, don't look into the IR lens. Just place your hand in front of it and see the is a red glare on your had. If there is a red glare then IR is work.
Another thing when you taking a look see through the Night owl NV monocular there should be a green glow from the image intensifier tube, if not, then the NV monucular isn't working properly. stewbison

http://wize.com/reviews-night-vision/amt-mo2-1-user-manual

this could be a tube fult

INPUT: 120VAC 60Hz 18W
OUTPUT 12VDC 1A.

This is the spec for the 18 million thor cyclops which i presume will be the same for the 15 million.
Red light on torch flashes while charging. As soon as full charge is done red light stays lit.

I am not familiar with that particular model flashlight. Most of the Cuclops flashlights use the 3.0 Volt CR123 Battery. However, here is the URL for Cyclops Solutions website. www.cyclopssolutions.com/index.html

contact Cyclops at www.cyclopssolutions.com

That's normal, its high and low. Just like your car headlights dual filimanets avoid the need for 2 separate bulbs/lights. As long as one comes on/off separate and then the unit turns off its working fine unless the manual says they are supposed to turn on at the same time but I doubt it.