It sounds like you are in the V menu. Go to the A menu and set an ordinary straight stitch. Also, check the Sewing Advisor - set it for medium weight woven, seam. Check that the feed dogs are up. It may be that the circuitry behind the button panel needs looking at and you need to take it to a repair shop for that.
DnC Sourcing is to make an Expert of developing products. ---> www.artdnc.com (82) 70-7893-2100)http://www.sourcingbuysell.com
We have 15 years developing experiences and will implement the advanced products to our customer.
Electronics, home appliances, sporting goods, medical products, smart phone, General Phones, machine equipment, cattle. Midsize engine
* Mechanical design, tooling, product design, machine design, reverse engineering (image), product design, MOLD Analysis
* Processor: AVR series, DSP, FPGA, ARM7, ARM9, etc.
* Circuit design, PCB ARTWORK Use Program: ORCAD, PADS
70% Motor Sales ---> www.buysellmotor.net, sourcing everything ->http://www.sourcingbuysell.com
×
180 views
Usually answered in minutes!
×