How do you get into the printer device to stop a printing job? I have a laser printer ML -1740

Yes, you need to update your printer's driver. The driver for Windows 7 can be found here:

http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=ML-1740

unplug then plug it in again. after u hook it up with the computer try turning it on and off before u start printing!

Drivers for that printer can be downloaded from the link below.

http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=&prd_mdl_cd=&prd_mdl_name=ML-1740

Robert from Blitware

http://www.driverguide.com/

Samsung ML - 1740 error light stayson

try

http://www.samsung.com/download/FileView.aspx?cttfileid=196408&type=Printer&typecode=15&subtype=Laser+Printer&subtypecode=1501&model=ML-1740/TEC&filetype=DR&language=

Try purging the 3 pending print jobs then try to print again. Go to Printer and Faxes on XP, then right click on your printer icon then select purge print jobs. Or double-click on the printer icon on your system tray (lower right hand of the screen) then click on the pending print jobs then purge it. Then try to print again.

I had the same problem and spent some time trolling the Net. But....I found it.

Run installer from CD.

Tthen go to system preferences > print and fax

Delete the ml-2510 by clicking the minus square

Click the add square..

Select the ml-2510 again, and make sure that at the bottom of this window, under the "Print Using:" field, you again select the ml-2510.

Click add.

That's it! You're good to go!

the paper sensor has a problem it thinks that the page position is out/finished clean the paper roller it may help part fix is to use manual feed

LSU Error