I took the bobbin area of my Singer Stylist Sewing Machine 533 apart to clean it, had an interrupting phone call and went back to the machine and couldn't remember how the parts go back. Please help me if you can! Thanks!

Manuals Library (manualslib) is the best site for manuals by a country mile. I just opened this one in less than a second. the website www.manuals.is has it, but it is not a good viewing format.

SINGER 5705 INSTRUCTION BOOK Pdf Download

ManualsLib https://www.manualslib.com > ... > 5705
View and Download Singer 5705 instruction book online. 5705 sewing machine pdf manual download.

Support

Singer https://www.singer.com > support
Singer Sewing Support. Find Manuals, Accessories, How-To videos, Troubleshooting Tips, Software Support and FAQ's.

‎Singer Model Number 1990 to... · ‎How to Find a Model Number... · ‎Sewing Help

..Videos that _MAY_ help?

Question edited for clarity.
Question moved from Land Phones.

The dial is for the thread tension and depends on what you are sewing. Keep in the middle number to start with. Here is your owner manual.

Singer Stylist 413 Instructions Manual - ManualsLib

https://www.manualslib.com > ... > Stylist 413

View and Download Singer Stylist 413 instructions manual online. Stylist 413 sewing machine pdf manual download.

• 
  

  Singer Stylist 413 Manuals - ManualsLib

  https://www.manualslib.com > ... > Sewing Machine
  
  Singer Stylist 413 Instructions Manual (65 pages). Brand: Singer ' Category: Sewing Machine ' Size: 7.89 MB. Table of Contents. 3.

LOOSE HANDWHEEL POSSIBLY

hi there.
not sure if the manual will help you out,but go to this link and have a read up.
Singer 2263 Instruction Manual Page 14
or this on a youtube video.
.
How to pull apart and reassemble the bobbin case area on front loading...
or this video.
How to Fix and clean the bobbin case area on your own sewing machine

if none of the above help try this link.
singer sewing machine model 2263 bobbin case is disassembled need...

It is important to know how to time a sewing machine so I hope you did this part right. Anyway, the feed dogs aren't engaging gives me an indication that you have set it up for "rewind bobbin". Set your machine up for sew, not rewind.

Not sure what you mean by "vertical" bobbin. Everything I've found indicates it is a top loading bobbin that sets horizontally in the machine.

These sites may be helpful:

Threading the ITP Singer 534 Stylist

Singer 534 Stylist Sewing Machine Threading Diagram

How to Insert the Bobbin in Singer 534 eHow

Singer 534 stylist bobbin threading Google Search

just work here singer stylist 534


///

I suggest taking back the new machine and telling them what happened and get another sewing machine .

I have just repaired a 7258 with a frozen bearing unrelated to the E2 code except that I thought I would lube the entire machine while it was apart, and through my ignorance, I greased the clutch that releases the mainshaft when winding the bobbin, and then when the clutch wasn't working correctly, caused the E2 error. I can say the E2 error is not caused by a plug not seated correctly, too much tension in the bobbin thread, or God having a bad day. The E2 error code is thrown when the bobbin holder is in the wind position, and the mainshaft rotates. There is a clutch just behind the hand knob on the right side of the machine, and if it has too much lubrication with a stiff grease, or on an older machine, if the lube has dried out, the clutch will not release properly. I took the clutch apart, cleaned the grease I put in it, and then lubed it with bicycle silicone oil. It now works as designed. The hardest part of the repair was figuring out how the plastic cases split apart! If anyone in the SF Bay Area has a 7256, or 7258 that gives the E2 code, I can fix it - it's actually kind 'a fun...

None I found are free, but this one downloads for $8.

http://www.sewconsult.com/singer/singer_instruction_manuals.htm#500

This is caused by inadequate tension on the top thread make sure there are no broken threads between the discs of your upper tension and it should be set on app #4