Electrical schematic for xas 56 atlas copco compressor

1ST Check the oil lvl. 2nd blow out the cooler. Take a temp gun and check across the cooler. Should be around a 40degree drop from incoming oil to exiting oil. If no drop it is possibly the thermal valve.

First, I'm not an Atlas representative.
* Check your warranty. Call for support.

*** Following is for information only.***
* Most stall out is due to dirt in carb, Fuel filter, and or fuel. Check complete fuel line from tank to carb.
* Check and replace air filter.
* Check and replace oil and oil filter.
* Probably needs maintenance; https://www.youtube.com/watch?v=4WamLFKcNf8
* Specs; http://www.atsequipment.com/ats_pdfs/Atlas%20Copco%20XAS%20375%20JD6.pdf
* More specs; http://www.onesourcerental.com/specs/atlas_copco_xas375_specs.pdf
* Instruction book; https://ftp.ahern.com/Service-Manager-Training-2015/Atlas-Copco-Training/Compressors/Compressor-Resources/Reference/XAS%20375%20JD6%20Inst%202011.pdf
* Customer shows start up; https://www.youtube.com/watch?v=Dg6_ai9Tbe0
* Start problem?; https://www.youtube.com/watch?v=lvX2e6wxX7c
* Starting (different model); https://www.youtube.com/watch?v=hiGI-H_66wQ
* Call Atlas for additional advice.
Aloha, ukeboy57

Atlas Copco has used John Deer Diesel engines in the past, that could be a warning or code concerning the engine since it starts with JD.

The staff at www.aircompressordelmarva.com has all the manuals for atlas copco air compressors. You can email or call them. They posted an Adobe link for me for a really large one so I could download it. Very helpful. Delmarva Air Compressor Powered by Network Solutions

check with atlas or atlas dealer. I would be guessing but most labels include the capacity in the model. So xas is the model and 125 is the capacity in cubic feet /minute

http://paloma.linkwinn.com/8b23fe-om442la-workshop-manual.pdf

http://paloma.linkwinn.com/8b23fe-om442la-workshop-manual.pdf

necesito el manual de atlas copco del compresor de alta presion xas 175

Check the Deutch diesel engine controls. Normally with
the compressor at full open, engine must continously run, sionce this is the point where the engine is not
heavy loaded. Check the injection pump as well as engine speed control and the air filter.

This is not a cd/dvd drive question.