**error** can't open this file???

Download and install the iRiver plus4 software and it manages playlists for you.

http://www.iriver.com/iriverplus/plus4.asp

I too has this problem but if you search by Dir list you'll be able to see all artists and then select the able you require. Hope this works for you

You open iriver plus3, right click on the song you want the album artwork for and click properties. Before this you have to get tha album artwork and put it into documents or something. Now see the picture of a square and click on the button on the left. Now open the picture of the album artwork you want and now click save tag on the bottom right of the property box.

I hope it works for u!!!!
:)

try bringing your music up as a file normally it works cause with a lot of devices that's the only way you can send them so bring your music up as files then open your i river as files then all you have to to do is copy and paste

If you set up Windows Media Player to autosync to the Clix, then, when you delete songs from the computer (including the wallpaper jpeg), the files also get deleted off the clix. Make sure you have Manual Sync enabled in Windows Media Player (or, more accurately, disable auto-sync).

If auto-sync is already disabled, then you have a good, old-fashioned DB corruption. You can reload the firmware from iRiver's website:
http://iriverinc.com/support/ultra/clix2.aspx.

Dear iriver users,

When I frist drag and dropped pictures onto iriver, nothing showed up. With more playing around, I discovered, frustratingly!..that I can download pictures onto WMP and sync it with my iriver that way. That is the only solution I have found, even though it seems possible with the drag n'drop!

good luck!

There is a maximum number of songs allowed (1000 for 4 GB) so you are probably over this magic number - they are still listed just don't play. I don't have solution for you - just a reason why.

You need to rebuild the database. You can do that using iriver Plus3 which is out now. I am not sure about Plus2. Look for rebuild database function in your software.

Format my iriver H10 [5GB;color]

There are two ways to format an Mp3 player - one on the computer itself, and one in Windows Media Player. Both methods will end up erasing all the songs on the player, but the player will be "good as new" after that. Sometimes reformatting in this manner will override the player's native formatting and cause problems - this can be reversed in most cases by updating the player's firmware. Firmware upgrades are available from most manufacturers' websites.

WARNING: The following procedures will erase all songs on the player.

Check if the file system is NTFS. If yes, format it to FAT or FAT32. - Connect player to computer, double-click my computer, right click on icon of mp3 player and select format. This only applies to Windows-based computers.
You can also format the player in Windows Media Player itself:
Connect your Mp3 player to the computer and open Windows Media Player. Click on the Sync tab. Pull down the drop down menu underneath the Sync tab by moving your cursor over the Sync tab and left clicking on the little black arrow underneath the Sync tab. Highlight "name of Mp3 player here 1GB" (wording may vary slightly), and then select "Format." - this should erase everything.
-Tha Mp3 Doctor